View Full Version : port help
09-05-2006, 11:01 PM
i am orting my box. i would like the port to exit in the rear. right in the middle. the max it can be is about 6"x10". the box is 2.25 after displacement. and i would like the tuning frequency to be 33hz. the box is 35*19*10
09-05-2006, 11:23 PM
is that for two subs?
if so, it's WAYYYYY too small.
09-05-2006, 11:42 PM
ya two 10inch FI ssd'd. they only recommend .9-1.5 cuft @ 33 hz
09-06-2006, 12:05 AM
port along the side with a 90 degree turn is your best bet.
something like this:
i manipulated the numbers to get the dimensions, volume, and tuning you wanted with a 3" wide port
09-06-2006, 12:26 AM
do you know those subs have an 11" outer diameter and the dimensions you posted were for a 10" tall box?
09-06-2006, 07:52 AM
the box is 10 deep 19 high 35 wide