View Full Version : Mounting depth for 6.5 in rear doors of Tahoe?
09-04-2006, 03:20 AM
It's an 05'.
09-04-2006, 08:51 AM
It depends. If you repace it in the factory location, you will not have as much depth to work with. I moved mine, and actually mounted them on the door panel itself (will give you roughly an extra inch or so).
09-04-2006, 12:32 PM
Factory location. These will only see HU power, and get little use. If no one is in the back seat, they stay off...don't care for rear fill.
09-05-2006, 03:04 AM
09-05-2006, 08:01 AM
09-05-2006, 12:40 PM
Thanks for that. I assume that won't include using any of the stock hardware....just going straight to the opening. What is a decent /efficient driver for this purpose these days?