PDA

View Full Version : HT Crossover



baseballer1100
08-27-2006, 10:49 PM
Is there anywhere you can buy crossovers for a ht setup? Im looking at the arbiter set and wanted to maybe find a preassembled crossover rather then me doing it. I have no experience....unless its not that hard. Thanks.

joetama
08-28-2006, 02:20 PM
You can get them from PE.... If you really want a custom one someone on here might be able to make you one too....

baseballer1100
08-28-2006, 05:30 PM
well for like 40 dollars more they come with the arbiter set but how hard are they to put togheter? Does anyone know if they are preassembled?

JimJ
08-28-2006, 05:36 PM
If you can read a schematic and solder two wires together, you can put a Xover together...designing them is the tricky part :)

joetama
08-28-2006, 05:43 PM
If you can read a schematic and solder two wires together, you can put a Xover together...designing them is the tricky part :)

Agreed.....

baseballer1100
08-28-2006, 05:45 PM
If you can read a schematic and solder two wires together, you can put a Xover together...designing them is the tricky part :)

Whats a schematic?...I think i can solder them togheter.

joetama
08-28-2006, 06:04 PM
Whats a schematic?...I think i can solder them togheter.

The diagram that shows what gets connected to what and how.....

baseballer1100
08-28-2006, 07:20 PM
ooo ok i think i can thanks for the help guys.

IamDeMan
08-29-2006, 09:57 AM
I don't think I want to learn how to build XOs LAWL. I enjoy working with wood and building enclosures, but working calculations out then soldering trinkets and beads to a board isn't my bag. Plus I am sloppy with solder lol. I just chose to buy a simple pre-built 12db 2 way XO @4.5khz to start with on my line array. Then when I get measurements done, I will see if any brainiacs here want to design and build a more suitable XO for it.