PDA

View Full Version : Deadning speakers?



THXdts
08-26-2006, 11:04 AM
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=12645

For a kit like this, how do you actually install it? In that picture it looks like that put it on the first panel of the car, and just cut out the speaker hole so the speaker can go through the deadner. Or do you put it behind the speaker magnet? On like the farthest back door panel?

ItalynStylion
08-26-2006, 12:35 PM
Its on the metal pannel behind the speaker. You should put it through the speaker hole and smooth it out so you get good adhesion and no bubbles and then just install the speaker in its little cutout

THXdts
08-26-2006, 11:00 PM
So where does all other deadner go? On the first panel part?

ItalynStylion
08-26-2006, 11:07 PM
It goes over anything that resonates (makes sound when you hit it)
I would suggest that you do all the flat metal pannels in the door, inside and out.
Im about to do my car as well!
www.sounddeadenershowdown.com
^^read everything in that link and you will know what to do

squeak9798
08-27-2006, 09:18 AM
Have you read the sticky at the top of this section regarding how to properly deaden doors?

You don't have to get as extravagent as he did in that thread.....but it should give you an idea of where the important-to-deaden areas