View Full Version : 4 ohms, 200 watts
Neostar63
08-15-2006, 05:14 PM
What sub and enclosure would you recommend for home theater use?
bri487
08-15-2006, 05:17 PM
check with lemans aka pvaudio. he seems to be pretty knowledgable on home audio setups.
http://www.soundsplinter.com/rli_ignition_series_8_inch_and_10_inch_diy_subwoof er_drivers.html
http://www.acoustic-visions.com/~acoustic/products/subwoofer_drivers/dayton_rs12/
http://www.acoustic-visions.com/~acoustic/products/subwoofer_drivers/adire_shiva/
Neostar63
08-15-2006, 06:12 PM
The price of the daytons and the shiva suit me well, but will 200 watts be enough to get them moving.
I'm running my Shiva currently with 250W in a pretty small sealed enclosure, and it moves quite well ;)
johnson
08-15-2006, 08:43 PM
Shiva in 3cuft enclosure tuned low.
Right click, save as, change extension to pdf.
http://hostmypiconline.com/images/VentedShivaApplications.jpg
I should make excursion pr0n...but I'm not sure my downstairs neighbor would like it too much :D
Neostar63
08-15-2006, 09:41 PM
I would be all for seeing some shiva pron.
ballstothewall
08-15-2006, 10:33 PM
I should make excursion pr0n...but I'm not sure my downstairs neighbor would like it too much :D
Just remember, I'll be able to **** off multiple floors of the dorm, without a subwoofer (if I try)... :blackeye:
joetama
08-16-2006, 12:23 PM
Just remember, I'll be able to **** off multiple floors of the dorm, without a subwoofer (if I try)... :blackeye:
Same here....
200 Watts should be plenty for you to have the low end that you desire. Also, I still like sealed boxes for home theater. :p:
ballstothewall
08-17-2006, 02:35 AM
Same here....
200 Watts should be plenty for you to have the low end that you desire. Also, I still like sealed boxes for home theater. :p:
Just got a coat of primer on the new mains tonight, well, alot of coats actually. I have achieved my goal, light, durable, sealed (as much as about 4 coats of primer would do), movable and its going to be a beater party system I believe.
*psst, 4 dayton references ported, and 1 MDT29 tweet*
Bolognablake
08-18-2006, 12:00 AM
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=295-470
Perfect for your application.
joetama
08-18-2006, 11:04 AM
Just got a coat of primer on the new mains tonight, well, alot of coats actually. I have achieved my goal, light, durable, sealed (as much as about 4 coats of primer would do), movable and its going to be a beater party system I believe.
*psst, 4 dayton references ported, and 1 MDT29 tweet*
You got pics somewhere....
He posted pictures of the proto on SSA.
:)
joetama
08-18-2006, 11:20 AM
He posted pictures of the proto on SSA.
:) I have to say I don't venture over to that neck of the woods very often. You got a link for me?
ballstothewall
08-18-2006, 11:55 PM
I have to say I don't venture over to that neck of the woods very often. You got a link for me?
I'll have real pics up in a couple days when I get my computer hooked back up to the network here at school... All I have got to say is Holy Crap :eek: :eek: :eek: :eek: :eek: :eek: