PDA

View Full Version : Home for the 15MT



Cahm Rohn
07-30-2006, 08:00 PM
I have a 15 MT being ran off a VFL 150.1. My question is would 9cuft @32 be all right? I plan on using (2) 6 in aero firing into the back seat with sub up in a 72 skylark.

smd4life
07-30-2006, 08:02 PM
ports back you may need more port area

Cahm Rohn
07-30-2006, 08:16 PM
Would 4, 6in aeros be enough

smd4life
07-30-2006, 08:17 PM
im not sure, pm PV audio, he would know for sure

ngsm13
07-30-2006, 08:19 PM
I'm telling you, for daily... it LOVES

4.5cubes NET tuned to 33hz w/ 90 square inches of port...

nG

Cahm Rohn
07-30-2006, 08:22 PM
Could wang and still have room for the kids things cool. As long as it hits the lows and disrupt breathing a bit.

Digital B
07-30-2006, 08:24 PM
Hmm.. Seen that sub somewhere.

When you get everything installed, let me know. Wouldn't mind hearing it. I only had it on 1kw in the short time I had it in my car..

Pop da Hatch
07-30-2006, 08:26 PM
I'm telling you, for daily... it LOVES

4.5cubes NET tuned to 33hz w/ 90 square inches of port...

nG


ive calculated that a 32hz tuning would show a 1 db gain ;)

Cahm Rohn
07-30-2006, 08:26 PM
Trunk=jello

PV Audio
07-30-2006, 10:49 PM
ive calculated that a 32hz tuning would show a 1 db gain ;)
I'd certainly like to see these calculations.

bamaboy
07-30-2006, 10:59 PM
9 cubes is more than an 18 needs :(

do nJizm's idea, mine in 4cubes each are crazy

mobeious
07-30-2006, 11:04 PM
i know that VFL150.1 put out power but i dont think that is going to do u any good at 1ohm i ran 1 of my MT18's on my VFL400.1 @ 2ohm and the MT laughed at it... it really sounded like **** you could tell it was underpowered i then droped the load to .5 and my MT smiled and wanged away..... my vote goes for more power

Pop da Hatch
07-30-2006, 11:07 PM
I'd certainly like to see these calculations.


you would say that - search sarcasim button on google - I'd certainly like to see those results....

Cahm Rohn
07-31-2006, 07:59 AM
Well I did want to run the 150.1 lower but I searched and found out that might not be a good idea, so I got dual 2, an ran it at 1 ohm. I was going to get a 2500d but couldn't find one so I got the 150.1.

PV Audio
07-31-2006, 11:36 AM
you would say that - search sarcasim button on google - I'd certainly like to see those results....
Well you see, we're communicating on this odd thing called the internet. You cannot tell sarcasm through text.