PDA

View Full Version : L7 box



05_ZX636
07-28-2006, 12:27 AM
i have all my stuff now, and was going to get boxes built. but now seems like good time to learn a bit about ported boxes so im going to build. i have table saw, circular and new jig saw. i have couple questions as far as the ports. im building 2 seperate boxes that will be in a wall in honda civic coupe. the dimensions of each box will be 18" wide x 30" tall x 20" D, can be 22" deep if needed. the book with subs calls for 3.5 x 16.25 port 13.73" long. what will the tuning be on this and do those dimensions seem like enough air space? they call for 6 cubes and that includes sub displacement but need to add port displacement and im not sure about that. each sub will be wired to 1 ohm with about 1300 watts. thanks for help

05_ZX636
07-28-2006, 07:47 PM
any suggestions?? starting tomorrow

05_ZX636
07-30-2006, 05:54 AM
ok i have everything cut except for port. what will it be tuned to like said above and what do i change measurements to to get around 30hz? thanks