Its time for: Whats my box tuning? :D

[Fast1one]

According to WinISD, I thought that my tuning was around 32 HZ ish. While reading the forums, I realized that the volume value you enter in WINISD is net, not gross. Instead of the 2.8 cubes I entered before, my entire volume is 4.6 cubes. The approximate tuning would therefore be in the neighborhood of 25HZ. No onder the little 8s could hit lows lol...

Here is a quick sketchup of my box....

http://img501.imageshack.us/img501/1534/assassinbox8op.png

Originally, the box was a doubleshot designed for two assassins. However both of them didnt fit lol, therefore I hacked the box up and made into a ported enclosure for all four assassins. Can you guys give me the best approximation as to what my tuning is? Furthermore, how much of the port would I have to take off to achieve 32 HZ? Any other recomendations for tuning frequency? Ill probably keep the box as it is for now. I like the lows :) Ill change it once I have time...

Thanks in advance

[Death By Bass]

box is about 2.8cuft tuned to about 35Hz

[Reit38]

wut would 2 type r 12's sound like in this box?

[Fast1one]

box is about 2.8cuft tuned to about 35HzMay I ask how you figured that out? I dont like WinISD.....always seemed unreliable to me...

Reit, for two type Rs its most likely WAY too small...

[Reit38]

dont they call for .75-1.25 tho ?

[heyman421]

ya, but 2-2.5 makes them smile

[Reit38]

u mean 2-2.5 each right?

[Spud2388]

yea, each. I'm in the process of making a box for 2 12" R's that I'm hopin is around 4-4.5 cuft after all the displacements are figured in. I would have to say if the box is 2.8 cuft total, its defiately too small.