PDA

View Full Version : another type r thread



Reit38
07-05-2006, 05:54 PM
ive looked and searched the threads and cant really find any help so dont hate

i wanna make a ported box for my 2 type r 12's the '04 model which call for 300rms a piece - there pushed by a rockford 750s 2 channel that puts about 800rms out.
my max demensions are 16tall 14deep and 36 wide

its going in a 2000 camry mostly for daily driving but maybe a local comp here and there


ive tried to use winISD but cant figure it out so im needin some help on tuning and the correct size and all of that any help would be really appreciated :naughty:

mikeyboc
07-05-2006, 05:57 PM
PM PV Audio, Mountaineer Man, or a couple others on here to get a design. Only a couple bucks and it will save you some time.

xluben
07-05-2006, 08:31 PM
i think your box is going to end up much smaller than recommended:

here's a moe lester box that's close:

http://img23.imageshack.us/img23/3493/295cubes34hz3625sqin2dd.png

it's bigger than the dimensions you allow for, and it's only 2.9 ft^3 @ 34Hz.

Reit38
07-05-2006, 08:37 PM
i might be able to use it thanks for that i was just trying to not take up my entire trunk

my very absolute max dem. are 15x16.5x38 but that'll be a tite fit im afraid and i might not get it in my trunk

Reit38
07-05-2006, 08:58 PM
well heres a dumb question.......

wut if i added some on to the width and took some off the depth ?:crap:

mikeyboc
07-05-2006, 09:32 PM
This might sound stupid, but it happens all the time . . .

Make sure you can get the box in the trunk after you build it. Just because those are your max dimensions, they might not be the max dimensions of what will fit throught he opening. Friendly reminder.

AlpineUser
07-06-2006, 01:06 AM
since you may want to go to comps im guessing it has to be ported....since you dont have much room you may just want to go sealed....it depends on the music you listen to really if you want it to sound good....metal and rock is sealed and rap/hip hop is ported....either way rap and hip hop will sound good in both....just use the max dimensions you got and figure out how to tune it and go from there...make sure you got room for your amp or amps if you were not thinking about it lol

AlpineUser
07-06-2006, 01:06 AM
well heres a dumb question.......

wut if i added some on to the width and took some off the depth ?:crap:

and that plan is only for one....you want 2 dont ya

xluben
07-06-2006, 01:24 AM
yeah, you could fit two 12's on that baffle, and that's about the biggest dimensions he could allow, so I posted it as an example of the max net volume he could get in that space.

Reit38
07-06-2006, 06:44 PM
right i was hoping for ported - there in a sealed pre-fab now and i was hoping to get louder....i listed to about 98% rap and yes it would be for 2