PDA

View Full Version : Building a slanted box

Fender85
11-28-2002, 09:54 PM
Ok, how do I measure this beast? I know you divide it up into a rectangle and a triangle and you add. But i forget how to measure areas of triangles and such. i want around 2 cuft, but I'm just not quite sure how to get there right now. Thanks for the help.

Chris

geonn
11-28-2002, 10:29 PM
(base1+base2) or the top and bottom most likly devided by 2 times the lenght times width so (b1+b2)/2 *H*L then you take that number and devide by 1728 to get yer volume in cubic feet

Jearod
11-29-2002, 12:58 AM
Hah, if you're talking about a slanted box like so, I believe you take from the top of the slant in a straight line to the bottom, and creat a second rectangle, like so:

You then find the area of (1) then find the area of rectangle (2) and divide by two. Then simply add them together.
I could be wrong, Geometry was quite a while back.http://www.auction-picture.com/pic1/live4ford/volume.JPG

ASDF12345
11-29-2002, 02:39 AM
sigh...just go here...

http://www.the12volt.com/caraudio/boxcalcs.asp

mykeys
11-29-2002, 07:30 AM
Geon you are correct.. GA yours is easier though.. The only problem with sites is that most of us work on the box designs when we are supposed to be doing other stuff so the equation is generally needed on the spot..Well at least for the people I know that are into building em.

Mike