PDA

View Full Version : Atomic Box Plans



mikey060
07-04-2006, 04:32 PM
alright, im building my sub box within the next few days and would like to make sure i made all the appropriate changes to make it work. It is for an atomic AP12.
This is the origional plan i started with, from RE's website...which is 2.5@35hz
http://img318.imageshack.us/img318/9606/reboxplans2el.png (http://imageshack.us)
Now, this is the chopped and screwed version. i had to lower it and add make it wider so it will fit it my trunk. i beleive i did the calculations correct and there should be equally as much port area and box volume as the origional.
http://img241.imageshack.us/img241/5308/boxplans1fc.png (http://imageshack.us)
I also made the port 3" wide all the way along, as RE appears to have not....unless my eyes are deceiving me:crazy:
http://img276.imageshack.us/img276/1705/ummokay8nw.png (http://imageshack.us)
could someone double check these numbers for me and make sure its actually 2.5@35, and not 2.3@38 or something haha need any more pics or whatever let me know:)

thanks in advance

mikey060
07-04-2006, 09:46 PM
ttt...anyone have any comments? im sure one of the skilled box builders/designers on here could do this for me quickly
i dont want to build this and find out its way off

mikey060
07-05-2006, 03:24 PM
bump:crying:

mikey060
07-06-2006, 03:13 PM
ttt...looks like i may just be going ahead and building it.
i didnt want any help anyways:p:

jimmyslide
07-10-2006, 01:04 AM
HAHA...noone wants to answer you :) DO IT!!!

Shawn

DarkHybrid
12-18-2007, 02:48 AM
I have to ask....those plans look freakin sweat, what software did you use to do those? Just curious! Thanks!