PDA

View Full Version : enclosure help



justinschmiidt
07-03-2006, 04:03 AM
im building an enclosure for my 12" L7's and i need to find out what im tuning it at. i already cut the wood as someone drew up plans but forgot to write down what its tuned to so can someone tell me and if its not sufficent then tell me what i should tune it to for deep deep bass.

heres a pic and the specs/all after taking wood width into consideration.\

box specs
l 34.50
w 19.50
h 16.75

port specs
l 3
w 18
h 13.25



http://img146.imageshack.us/img146/8002/box6eg.jpg

Decipha
07-03-2006, 04:30 AM
is the box divided in the middle? is their a divider board that allowed each sub to play in its own chamber?



**this is for a single port for both subs in shared space**
5.6 cu ft^3 @ 27 hz
port face 3 x 13.25 length = 18... thats with a single port but yet you have two so don't even regard this

justinschmiidt
07-03-2006, 09:08 AM
2 ports single chamber. im about to seperate them though. so thatd be roughly 2.7cu

justinschmiidt
07-04-2006, 10:56 AM
how much would i cut the ports to make the enclosure like 37-42 hz