PDA

View Full Version : Port placement questions!



Rc 415
06-26-2006, 01:41 AM
Well, I have the box all put together come to find out the 3" Ports I ordered are too big with the flanges (6.25") to all fit on one side of the box! So I would like to know if thew can be placed as shown in the pictures below:
http://img105.imageshack.us/img105/4190/boxport16vq.png
http://img143.imageshack.us/img143/9901/boxport6yx.png
I would also like to know if this will change anything as far as how the box sounds ect.

Flipx99
06-26-2006, 01:44 AM
pics don't work

Rc 415
06-26-2006, 01:46 AM
**** Tinypic has been malfunctioning for the last couple days. Should be fixed in a moment.

smd4life
06-26-2006, 01:48 AM
yes sir indeed

Rc 415
06-26-2006, 01:58 AM
Omfg these **** image hosting places are shrinking the images to nothing!

Rc 415
06-26-2006, 12:32 PM
U see the pics?

Rc 415
06-26-2006, 08:13 PM
No opinions huh?

Rc 415
06-26-2006, 11:20 PM
I know someone knows!

Ingleside
06-26-2006, 11:47 PM
it doesnt look like you have a choice.
you could try to use two 4 " ports instead of three 3 inch ports.

you could try to get all three on the side opposite the driver. two up top and one slightly lower in the middle and cut a hole thats angled so the port clears the hump by the time it gets to the middle. you can get ceative with a wood file.
its kind of ghetto and more of a last resort deal but i doubt anyone will see it since its going under your rear seats.

Rc 415
06-29-2006, 01:36 AM
I thought about having all 3 on 1 side, but each flare end is like 6.25" and that will make it too much even if istaggered the port in the middle.