PDA

View Full Version : Particle board for speaker rings....



whitemdx
06-25-2006, 11:06 PM
I am waiting for all my stuff to come in and purchasing the little stuff locally..Local home depot only have 4'x8' MDF boards and I don't need nearly that much. I building a fiberglass box for 1 12" AA arsenal and wondering if it will be fine if i used particle board for the front piece of the box and the rest will be fiberglass? Or other alternative type of woods beside MDF?

Worlddre
06-25-2006, 11:06 PM
pboard will be fine for a speaker ring

iagrdshaka
06-26-2006, 10:22 AM
go for it

nVRuckus
06-26-2006, 11:11 AM
particle board is fine, it will soak up resin alot more than MDF actually ;)

tRiGgEr
06-26-2006, 11:23 AM
As long as it is just a speaker ring, and not an actuall wall of the enclosure sure.

If it is a wall, fiberglass it...

Curel
06-26-2006, 04:38 PM
For a speaker ring it's fine, but is a little harder to cut then mdf. my router zips through mdf, but drags on particle board.

NhustlaR
06-26-2006, 04:44 PM
I have a suggestion. Places like home depot and lowes, whatever else you have NORMALLY have MDF shelving which comes in different sizes. check that out, they have 3'x16", 16"x1', etc, check that out first, theyre like 3 bucks a sheet for that

nVRuckus
06-28-2006, 10:34 AM
particle board is probably more ideal anyways, lighter and absorbes resin better which is ideal for rings because you want to fuse the material to the rings unless your rabbetting the edges.