PDA

View Full Version : Help with sealed box design for two AA Assassin 10's



Phreaker
06-22-2006, 07:14 PM
FedEx delivered my g/f's AA Assassin 10's today and I have been trying to design a sealed box for the back of her Kia sportage.

I would build her a ported box but the amp she has doesn't have a SSF on it and becuase she listens to a variety of music so I think sealed is her best option.

Ascendant Audio recommends .7ft^3 per sub sealed and 1.2ft^3 per sub ported @ 32Hz.

Basically I have come up with this.

Internal measurements = 11" tall x 11" deep x 24" long / 1.68055556ft^3 internal

Outer measurements = 12.5" tall x 12.5" deep x 25.5" long / 2.30577257ft^3 external.

This box doesn't exactly follow the golden ratio of 3:4:5 but does this design sound good to you guys?

Heres a paint of the box design plan:

[img=http://img210.imageshack.us/img210/7959/aaassassindual10sealedboxplan7.th.jpg] (http://img210.imageshack.us/my.php?image=aaassassindual10sealedboxplan7.jpg)


If I have done my math right then the cuts we'll need are:

Top and Bottom = two 25.5" x 12.5" cuts

Sides = two 12.5"" x 11" cuts

Back = 24" x 11"

Baffle board = 24" x 11"


does that sound right?Do the joints look strong?

Decipha
06-22-2006, 07:26 PM
sounds about right looks like it'll piece together... you should be fine with out any bracing...


btw why not port low say 27-30 ??? no subsonic filter needed for that low of a tuning

Phreaker
06-22-2006, 07:35 PM
Thanks....

I am going to build sealed first I think just to see how she likes it,if it isn't loud enough then I'll replace and build a 2.5ft^3 slot ported box tuned to the low 30's

bobby_7
06-23-2006, 12:49 AM
i would say just take some time and build you a ported box and be done with it.