PDA

View Full Version : box for type-r's



espguitarist91
06-22-2006, 02:08 AM
Ok, well im not sure but im considering buying 2 type-r's and i want a ported box, but dont have materials, tools, or skills to build one. Im not sure on the size, but what about ~ 4 cu. ft. and tuned to say maybe 32hz? I just wanted to see how much you guys would charge for a box such as the one listed.
Thanks

dleccord
06-22-2006, 02:45 AM
buy the tools and make your box:)

Expy2K
06-22-2006, 02:49 AM
I would build you one, but you are too far away..


and I am with stupid get your own tools at Lowes or Home Depot..

Under $90 total for everything, Saw, Nails, Wood, Ruler, Sand Paper, Glue..

Then use Moe Lesters 4.5 cubed box plans tuned to 32hz... or was it 33?

Whatever..


:)

espguitarist91
06-22-2006, 02:58 AM
not enough money to buy everthing, but what would i use to cut perfect circles other than a router? and ive never built a box before, so im not very confident. But hey, im close enough so i can 5$ on a TCAB!!!!!

Pyro_By_Nature
06-22-2006, 02:59 AM
I charge $50 + materials and shipping.

Pyro_By_Nature
06-22-2006, 02:59 AM
a jigsaw and steady hand will get you a fairly nice cut out.

espguitarist91
06-22-2006, 03:09 AM
But what do you rhink about the cu. ft. and the tuning frequency? Bigger box, higher/lower frewuency?
Thanks

Expy2K
06-22-2006, 03:11 AM
The ideal box for an 2 12" Rs

is between 4-5 cubes tuned to 30 in Suvs and 33 in Sedans..



:)

espguitarist91
06-22-2006, 03:14 AM
wow looking at my last post i realized i **** at typing. But is there anyone near chicago that could build me a box? Dont really want to try to build one.
Thanks