06-20-2006, 10:26 PM
I've been trying to dial in my system and am running into a problem with my MB Quart P-series 5.25" in the front. They are in Q-logic kicks w/ polyfill. I can't seem to cross them over any lower than 150 hz on the hpf or they start to pop at high volumes :nono: . I just know they would sound so much better if crossed over lower. They are running on a Crossfire amp at 75 watts. I used a preamp crossover w/ an 18db slope as well as the crossover on the amp with a 12db slope and the outcome is the same. I see that so many of you crossover your comp's so much lower without problems. Is there something I'm doing wrong? Thanks.