PDA

View Full Version : question about double baffle....



baseballer1100
06-18-2006, 10:46 AM
Ok i ran out of wood and i only need one piece i have some .5 inche mdf left...Would it be ok to glue two pieces togeteher and would it be as strong as the 3/4s mdf? This is for two 18 inch mts....

bjfish11
06-18-2006, 10:49 AM
You trying to glue 2 pices of 1/2" MDF together right?
If thats the case, YES, i dont see any reason why it would not be as strong. I would guess it would actually be stronger than a sinlge baffle made from 3/4".

baseballer1100
06-18-2006, 11:00 AM
yeah thats what im talking about i dont really see any reason in going out and spending 20 dollars on another board...

bjfish11
06-18-2006, 11:20 AM
yeah thats what im talking about i dont really see any reason in going out and spending 20 dollars on another board...
Shouldnt have to. Just double up the 1/2". You could always triple it up, to equal a double with 3/4".

baseballer1100
06-18-2006, 12:57 PM
Shouldnt have to. Just double up the 1/2". You could always triple it up, to equal a double with 3/4".

Sounds like a plan you think i should do that anyway..being two 18 mts or would 1 inch be enough...

bjfish11
06-18-2006, 01:29 PM
On my 2 MT's, I have every panel double baffled, except the bottom. It is a heavy SOB, but I'd rather be safe than sorry. If you have enough wood, I would just go with a triple 1/2" baffle to be safe. Wont hurt anything.

baseballer1100
06-18-2006, 01:37 PM
Alright...Yeah im going to try this see how it is then i might ahve to build another boix..