Kusan_31
06-09-2006, 04:36 PM
hey guys,
just wanted to share my experiment with free wood on the ground and a semi broken sub. im a tight sucker when it comes to spending money on my play-around projects, so i used everything recyclabe i could find.
so this is my sub i got free from a friend. however the cone was a little beat up and all the VCs were electrical taped onto the push terminals so i did a really quick solder job.
http://i31.photobucket.com/albums/c388/kusan_31/r1.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r2.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r3.jpg
i sealed all the pieces of wood with some primer sealer and urethane for the heck of it. i didnt have access to a camera at the beginning of the build, but this is when i started plugging the pieces on.
http://i31.photobucket.com/albums/c388/kusan_31/r4.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r5.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r6.jpg
wieghing it down:D
http://i31.photobucket.com/albums/c388/kusan_31/r7.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r8.jpg
next i added a baffle in the front to flush mount the driver, also rounded the port exit.
http://i31.photobucket.com/albums/c388/kusan_31/r9.jpg
just wanted to share my experiment with free wood on the ground and a semi broken sub. im a tight sucker when it comes to spending money on my play-around projects, so i used everything recyclabe i could find.
so this is my sub i got free from a friend. however the cone was a little beat up and all the VCs were electrical taped onto the push terminals so i did a really quick solder job.
http://i31.photobucket.com/albums/c388/kusan_31/r1.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r2.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r3.jpg
i sealed all the pieces of wood with some primer sealer and urethane for the heck of it. i didnt have access to a camera at the beginning of the build, but this is when i started plugging the pieces on.
http://i31.photobucket.com/albums/c388/kusan_31/r4.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r5.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r6.jpg
wieghing it down:D
http://i31.photobucket.com/albums/c388/kusan_31/r7.jpg
http://i31.photobucket.com/albums/c388/kusan_31/r8.jpg
next i added a baffle in the front to flush mount the driver, also rounded the port exit.
http://i31.photobucket.com/albums/c388/kusan_31/r9.jpg