PDA

View Full Version : Viper 791xv probs



grtn316
06-06-2006, 11:54 PM
A month ago, I was using my truck as a radio. Well, the battery died after about an hour (forgot to turn it on) and then the truck tried to turn over. It eventually stopped. After I jumped my truck and got it started, the remote lost signal to the brain. I am not sure exactly how to program the brain to see the remote but I have tried a few things. Does anyone know the exact steps to program the remote to the brain or should it never lose signal? Could I have a fuse blown on the brain or something? My installer is not around and so I gotta figure this out on my own.


Thanks for your help.

CHIT0WNZHUSTLA
06-06-2006, 11:55 PM
Rtfm

project f-150
06-06-2006, 11:56 PM
it shouldnt have lost programming just from being without power.

project f-150
06-06-2006, 11:57 PM
do you know where the valet switch is?

maldecido33
06-06-2006, 11:59 PM
prolly shorted something, you better have fused any wire getting power, switched or constant :-)

grtn316
06-07-2006, 12:42 AM
yea, I know where the valet switch is.

grtn316
06-13-2006, 02:34 PM
bump...

Anyone have any ideas?

Black_Jesus
06-13-2006, 03:24 PM
should just be able to get within range of the vehicle with the remote, repeatedly press the lock button every second or so, and it will sync back up and work as normal

baseballer1100
06-13-2006, 05:19 PM
I also having problems

grtn316
06-14-2006, 03:35 PM
Nope, nothing.

Does anyone know the steps to program it?

1loudsuv
06-14-2006, 03:44 PM
It sounds like the transmitter may need to be reprogrmed.

Open door
turn ignition on
press overide once
press again and hold
larm will chirp once
press lock on remote
alarm will chirp again
relese switch and turn car off

Try that and let me know.

overide is the valet switch

grtn316
06-14-2006, 10:38 PM
It sounds like the transmitter may need to be reprogrmed.

Open door
turn ignition on
press overide once
press again and hold
larm will chirp once
press lock on remote
alarm will chirp again
relese switch and turn car off

Try that and let me know.

overide is the valet switch


hmm...

I did it exactly the way you said. I tried it with the valet switch on and off. Neither worked.

When I held the button in and it chirped, I saw the LED light flash. While holding it in and pushing the lock button, the remote just beeped like it was out of range. I tried this several times and also the other buttons.

Thanks!

baseballer1100
06-14-2006, 10:40 PM
what if you dont have a valet switch? or does everyone get one?

1loudsuv
06-14-2006, 11:10 PM
hmm...

I did it exactly the way you said. I tried it with the valet switch on and off. Neither worked.

When I held the button in and it chirped, I saw the LED light flash. While holding it in and pushing the lock button, the remote just beeped like it was out of range. I tried this several times and also the other buttons.

Thanks!
when you push it and after you hear the chirp let go of it and then press on the pager the lock button and if it doesnt work then its probably something else

CHIT0WNZHUSTLA
06-14-2006, 11:13 PM
everyone gets one, i have one but its not hooked up lol

88Vette
06-14-2006, 11:19 PM
Check out the F.A.Q. or help in the manuals.

If you’d like to read the manuals over again you can download the 791xv remote manual as well as the Viper 791xv installation and owners manual from here:

http://rapidshare.de/files/17088039/Viper_Manuals.zip

http://rapidshare.de/files/20523688/Viper_remote_479V.pdf.html

After going to the Rapidshare site click on the free download section and it will take you to these files.

grtn316
06-15-2006, 10:57 AM
when you push it and after you hear the chirp let go of it and then press on the pager the lock button and if it doesnt work then its probably something else


No workie.

Any other ideas?