PDA

View Full Version : My Mountaineer Man Double Shot box build



Rage00
06-06-2006, 01:32 PM
Well Mountaineer Man did this design for me awhile ago. I just finally got around to doing something with it.

Here is the design. It is his version of the Double Shot.

http://i2.photobucket.com/albums/y7/peoples240/powerbass_doubleshot_1.png

This is what I cut everthing on.

http://i2.photobucket.com/albums/y7/peoples240/Tabelsaw.jpg

The cut pieces

http://i2.photobucket.com/albums/y7/peoples240/cutwood2.jpg
http://i2.photobucket.com/albums/y7/peoples240/Cutwood.jpg

Putting the port together

http://i2.photobucket.com/albums/y7/peoples240/port1.jpg
http://i2.photobucket.com/albums/y7/peoples240/port2.jpg

The rest of the the construction.

Back
http://i2.photobucket.com/albums/y7/peoples240/back.jpg

Front
http://i2.photobucket.com/albums/y7/peoples240/front.jpg

Right Side
http://i2.photobucket.com/albums/y7/peoples240/rtside.jpg

Painted port
http://i2.photobucket.com/albums/y7/peoples240/paintedport.jpg

Rage00
06-06-2006, 01:32 PM
Top view
http://i2.photobucket.com/albums/y7/peoples240/topview.jpg

5" of Port
http://i2.photobucket.com/albums/y7/peoples240/5inport.jpg

Finished Box
http://i2.photobucket.com/albums/y7/peoples240/finished.jpg

I just need to cut the holes for the subs. I might wait untill I can get my hands on a router. I just don't feel like free handing it with my jigsaw.

Prowler573
06-06-2006, 01:34 PM
:thumbsup:

Looks like a box. :)

j/k, looks nice, mang. :D

ramos
06-06-2006, 01:37 PM
Looking good my brother. Hurry up and wipe the excess glue while it's wet. Much easier than sanding it later :)

photocrazy8
06-06-2006, 01:38 PM
very nice, good job

jd_man_90
06-06-2006, 01:54 PM
very nice build quality i wish i had access to a table saw. i don't quite understand the theory behind the double shot, does anyone wish to explain? but over all a very nice looking box. what finish are you going to put on it, carpet?

Pyro_By_Nature
06-06-2006, 04:08 PM
very nice build quality i wish i had access to a table saw. i don't quite understand the theory behind the double shot, does anyone wish to explain? but over all a very nice looking box. what finish are you going to put on it, carpet?


Well, in a very short summary.A response in car closer to that of a sealed box, but with the output of a ported box (in most cases it'll outdo a "regular" ported box, even if its only by a decibal or two).


And I concur with the others, nice build quality :)

I might even have a mod. for you that you can do (after the box is built) to adjust the sounds to your taste even further :)

Rage00
06-06-2006, 04:32 PM
ha, yeah right...

either way, the box pictured here is far from a "double shot" anyway... its just going to act like a ported box, with alot of port area. Too much port area probably.


I'll have to wait to find out. My deck should be here any day now, and then I will tell ya how it sounds.

Pyro_By_Nature
06-06-2006, 11:07 PM
ha, yeah right...

either way, the box pictured here is far from a "double shot" anyway... its just going to act like a ported box, with alot of port area. Too much port area probably.

You're an idiot, and you cannot comment on these types of boxes anymore, because in this post you have proven to me, that you dno't know jack **** about how snail shells/ double shots work.Trust me, I'm sure I know at least 10x the amount of correct information about these boxes than you ;) I could tell you how they work, but you still would probably be far too stupid to understand most of it.

FYI, It's not "far from" exact same concept.Is it that hard for you to grasp.Or will I have to spell it out in crayons for your retarded self? BTW: Not too much whatsoever ;)

Please just go back to playing with your moms $100 piece of **** station wagon and woofers that YOU can't get loud.

You don't know the first thing about box design.All you know how to do is put parameters into a horn caculator.

To rage, sorry for the dump.I just can't have this fool spreading around rumors.I want to ask you a couple things about when you built it, go ahead and PM me when you get a chance. And if you wish I will erase most of this post.

Rage00
06-07-2006, 08:02 AM
No, It's all good. Don't worry about it. I will send you a pm right now.

80INCHES
06-07-2006, 08:10 AM
nice build..box looks good.....let us know how it sound
and if u can when everything is up and running get some vids up

80

truckstoy
06-07-2006, 08:16 AM
very nice looking box, good work

NeverEnuffBass
06-07-2006, 04:09 PM
Nice table saw. Looks like it gave you some real clean cuts.

heyman421
06-07-2006, 04:11 PM
You're an idiot, and you cannot comment on these types of boxes anymore, because in this post you have proven to me, that you dno't know jack **** about how snail shells/ double shots work.Trust me, I'm sure I know at least 10x the amount of correct information about these boxes than you ;) I could tell you how they work, but you still would probably be far too stupid to understand most of it.

FYI, It's not "far from" exact same concept.Is it that hard for you to grasp.Or will I have to spell it out in crayons for your retarded self? BTW: Not too much whatsoever ;)

Please just go back to playing with your moms $100 piece of **** station wagon and woofers that YOU can't get loud.

You don't know the first thing about box design.All you know how to do is put parameters into a horn caculator.

To rage, sorry for the dump.I just can't have this fool spreading around rumors.I want to ask you a couple things about when you built it, go ahead and PM me when you get a chance. And if you wish I will erase most of this post.

no use in getting bent out of shape, no reason for anyone here to take his word over yours, we'll see how the guy likes his box, no big deal

very nice looking box, by the way

xpl0it
06-07-2006, 04:14 PM
What is ideal for port area? I've been at this question for a while and my box design permits 122sq. inches of port area for my 4 12" L7s.

Pyro_By_Nature
06-07-2006, 05:06 PM
What is ideal for port area? I've been at this question for a while and my box design permits 122sq. inches of port area for my 4 12" L7s.


Do you have AIM? If you want you can PM me your AIM name and I'll help you when I get back from a job I have to go and finish.Despite our differences.

tRiGgEr
06-07-2006, 05:33 PM
How is that a "doubleshot" box:confused:

Rage00
06-09-2006, 04:01 PM
http://i2.photobucket.com/albums/y7/peoples240/installed.jpg

I just finished putting the box into my truck, and wow does it sound great. I was supprised on the out put. I gets crazy loud, and sounds pretty good doing it.

I have a Cadence z8000 pushing the powerbass 12's and for the money I have into the system I am happy.

I would post a vid of them, but I don't know how.

tRiGgEr
06-09-2006, 04:02 PM
Do you have a camera that can take video? Host it @ putfile.com and that's it.

Rage00
06-09-2006, 04:18 PM
Click here to watch powerbass (http://media.putfile.com/powerbass)
I hope this works.

Pyro_By_Nature
06-09-2006, 06:00 PM
Glad you're happy with it.

You can also upload it to realm of excursiom http://www.realmofexcursion.com

PV Audio
06-09-2006, 06:17 PM
Looks loud, bring it to Indy :)

Ricky616
06-09-2006, 06:21 PM
nice box ;) i like the song in the vid :D

Silver
06-09-2006, 06:25 PM
That looks fookin awesome!!

Hey Mountaineer Man. When ya have some time I'd like to talk to ya. :)

Beat_Dominator
06-09-2006, 06:33 PM
Nice vid :thumbsup:

Rage00
06-09-2006, 10:32 PM
Looks loud, bring it to Indy :)


I will be down there in July for a softball tournament. I will probally drive my truck down.

Pyro_By_Nature
06-10-2006, 04:57 PM
That looks fookin awesome!!

Hey Mountaineer Man. When ya have some time I'd like to talk to ya. :)


Go ahead and PM me whenever you have time.I'll be back tues.

SPL140.2
06-10-2006, 09:06 PM
i dont know if it was the camera or not but those subs sounded distored, was the gain to high?? or was it the camera?

azbass
06-10-2006, 09:12 PM
nice box. but crappy paint job..

Rage00
06-11-2006, 02:57 PM
i dont know if it was the camera or not but those subs sounded distored, was the gain to high?? or was it the camera?

The vid was taking with my digital Camera. I was supprised that it came out as good as it did.

vetkilr
06-11-2006, 07:01 PM
Click here to watch powerbass (http://media.putfile.com/powerbass)
I hope this works.
Not workin for me???

Can you load it on somewhere else?

Fast1one
06-11-2006, 09:09 PM
^^^It took a whole for me.....but eventually it worked. Give it some time :)