View Full Version : Need help with SoloX 18 and WinISD

06-05-2006, 03:41 PM
Hey all,
I am using WinISD to plot a box for 2 soloX 18s, I set it up for 22cu. ft. and 2 ports 20in. by 7.5in. This curve doesent look very smooth to me, but I am comparing it to a box I did for 2 L7 15s that looked VERY nice in winISD. Just wondering how this looks to someone more experianced in winISD and how they think it would sound. Thanks for any help.

06-05-2006, 03:43 PM
Heres the pic

06-05-2006, 03:50 PM
that really has a nasty drop off. any reason it needs to be 22 cu. ft?

06-05-2006, 04:00 PM
22 cu. ft was to give it the 10cu. recomended and space for woofer and port. it leaves about 9cu. per woofer with the ports that big.. even when I shrunk the box down though it was pretty nasty.

06-05-2006, 04:05 PM
just played around with it, if I droped it to 10cu. ft then the only thing I accomplish is taking down the peak (loosing outout) but that whole dropped area stays the same... I'm thinking about doing 4 L7 15s instead of 2 SoloX 18s, only because no matter what I seem to do with the X's I get a drop like that, but the L7 box I am building comes out nice.

06-05-2006, 05:22 PM
Anyone on how they think it would sound like this?

06-05-2006, 07:37 PM

06-05-2006, 10:22 PM
winISD *****, you'll find out the sound is quite different once you actually load it into a car ;)

06-05-2006, 10:42 PM
so are you saying that the specs I layed out are good or bad (22 cu. ft. with 2 ports 20" X 7.5" 21" long

06-06-2006, 07:54 PM