View Full Version : Need Help Building A Slot Ported Box For an 02' Chevy Tahoe

05-27-2006, 11:02 AM
Hi My Name is Cisco,I'm new to this forum, I recently bought a complete audio system for an 02' Chevy Tahoe (no bose and no Onstar) but I need help finding the measurements or visual aid to build slot ported box for one 12" Rockford Fosgate Power T2 that could fit behind the third set of seats of the 02' chevy tahoe. I was wondering if any of you guys could help me out with this? Thanks.

That's what i bought, just in case if anybody asks

Phoenix Gold R5.0:4 (1)
Phoenix Gold Octane-ZR 6.5 Comp. (1)
Rockford Fosgate T212D4 (1)
Rockford Fosgate T162C (1)
Hifonics BXi 1606D (1)
Clarion DXZ865MP (1)

Thanks In Advance.

I Think The RF Power Enclosure Is Supposed To Be 2.25 cu.ft. net and 3.12 gross and tuned to 40 hz termpro and 37hz actual in car. Even if this was the case how do i make it fit in the back of those seats?

05-29-2006, 08:04 PM

05-29-2006, 09:24 PM
well how much room do you have behind the seat. in H=? D=? W=? if wedge D1=? D2=?
D1 is top D2 is bottom!

05-30-2006, 03:20 AM
Wedge: D1=9, D2=14, H=23, W=48.
And maybe facing towards the window.
or the sub and slot facing up.

I Think The Box Is Supposed To Be 2.25 cu. ft. and tuned to 37 hz

http://www.rockfordfosgate.com/scripts/rightnow.cfg/php.exe/enduser/std_adp.php?p_sid=dLxOxM8i&p_lva=&p_faqid=469&p_created=1121121178&p_sp=cF9ncmlkc29ydD0mcF9yb3dfY250PTUmcF9zZWFyY2hfd GV4dD0mcF9zZWFyY2hfdHlwZT0zJnBfcHJvZF9sdmwxPTE5JnB fcHJvZF9sdmwyPTI2JnBfY2F0X2x2bDE9fmFueX4mcF9zb3J0X 2J5PWRmbHQmcF9wYWdlPTE*&p_li=


05-30-2006, 07:41 AM
well im getting 5.7cuft to play with .

06-09-2006, 12:10 PM
so far this is what I got tell me what you guys think.


the sub and port is supoosed to be facing up due to space limitations

06-09-2006, 04:00 PM
check this thread out