View Full Version : Imaspaceguy Private build

05-21-2006, 09:46 PM
Ok, got muh wood cut and glue waiting, this is ognna be 2 seperate boxs for L7's.
Pics to come. Plans made by jmanpc


05-21-2006, 09:48 PM
did i help ya with this design awhile back?

05-21-2006, 10:29 PM
you know... once it's on the internet it's not private anymore...

05-21-2006, 10:54 PM
10" L7s?

05-21-2006, 11:11 PM
tehre 12" I meant private as in no one is building them for me for a cahnge.

05-21-2006, 11:39 PM
I didnt, i still have to do the port, the side taht got cutoff in the picture is onyl tehre to make sure the wood is and glued and angled right, i stil ahve to glue the chambers in. only 3 pices are glued so far.

James Bang
05-22-2006, 12:56 AM
cool.. hope this one comes out better than the one you paid for.

05-22-2006, 08:37 AM
shoulda done this from the start when i told you to

05-22-2006, 11:21 PM
More pics: Sum glue dripped in the box but im gonna get that out,and i had to use pces of wood to keep the wood angle straight.

PV Audio
05-22-2006, 11:43 PM
Is this pelota's first build? :D

05-22-2006, 11:52 PM
yeppers :)

PV Audio
05-23-2006, 08:32 AM
Niiiiiiiiiiiiiiiiiiice. Hope it turns out fo ya.

05-23-2006, 11:43 AM
To bad that box design is WRONG:crap:

Edit -

Here is what was designed wrong.

Did not account for port material displacement, port end correction, proper port displacement volume, and proper port measurement. Did not use NET volume for finding port length. So this adjusted the enclosure volume/tuning.

05-23-2006, 11:51 AM
Congratulations on your 1.5ft^3 box tuned to 38.7hz before driver displacement...

rocky 59
05-23-2006, 12:22 PM

05-23-2006, 03:51 PM
**** that sux...i calculated the material on the outside finsihed the box, and everything went together smoothly, now for how it sounds.....

05-23-2006, 04:41 PM
Yeah sorry man. 1.5 for a 12 will be very small. Low end output will suffer and with the higher tunning the responce will have a very large peak near tunning.

Hope it ends up sounding good to you. If you need any help shoot me a PM.

PV Audio
05-23-2006, 05:37 PM
I knew that the design looked off, but since he's happy with it, there was no need to say anything :)