PDA

View Full Version : box help!!!



photocrazy8
05-05-2006, 12:56 AM
im designing a box for a 15. 7 cubes at 18 Hz (not my box). when i enter the info into an online calculator it says over 100 inches of slot port at 6 in wide port and 16 in tall. is this right?

Ingleside
05-05-2006, 12:58 AM
no.

16x6=96

is this for the home thearter box?

photocrazy8
05-05-2006, 01:00 AM
no.

16x6=96

is this for the home thearter box?



i know thats 16x6 is 96. whats does the 96 mean? im trying to determin the length of the port

yes its for a home thearter

http://www.carstereo.com/help/Articles.cfm?id=31

thats the place i used...

hofulstrof
05-05-2006, 01:03 AM
what sub are you useing

photocrazy8
05-05-2006, 01:05 AM
adire audio. its the tempest 15 inches

Ingleside
05-05-2006, 01:05 AM
96 is the port area

its gonig to be about 100 inches of port length

hofulstrof
05-05-2006, 01:07 AM
oh ya and how much power

photocrazy8
05-05-2006, 01:07 AM
96 is the port area

its gonig to be about 100 inches of port length


should the length never exceed the area? im a lil confused what that has to do with the port length.

Ingleside
05-05-2006, 01:09 AM
thats the way it is.
not to be a ****, but may be you should read up on how to design a box before you make plans for someone.

photocrazy8
05-05-2006, 01:11 AM
this guy does not know that much, he does not know how much power. the online thing said 106 in port lenth...how did you get 100? im still learning how to design correctly. thanks for the help guys...

photocrazy8
05-05-2006, 01:13 AM
thats the way it is.
not to be a ****, but may be you should read up on how to design a box before you make plans for someone.


i totaly agree with you, i have read every sticky and forum and post i could find but there were no solid equations to help me threw it and the people i have asked to teach me said its too hard to teach so i have been left scraping for myself...

Ingleside
05-05-2006, 01:13 AM
depending on the displacement its going to be between 102 and 106.
anthing between that is going to keep it at 18 htz.. but you might be at 18.2 or 18.5.
at port lengths like that it wont be the end of the world.

if you are going to use the online calc for your numbers then go wit that. 106 would work.

Ingleside
05-05-2006, 01:14 AM
PM sent

adio
05-06-2006, 01:12 PM
oh ya and how much power
350 watts from a rythmik audio plate amp