PDA

View Full Version : need box plans........



adio
05-03-2006, 08:07 PM
this is for the tempest. 7 cubes tuned to 18Hz with a slot port. it's goin in my living room, so no dimension restrictions here. perfect cube or a rectangular shape. need bracing in it too. i want it to look like this http://www.caraudio.com/forum/showthread.php?t=153318

or like this
http://i8.photobucket.com/albums/a11/mobster909/ID%20box/04-13-06_0608.jpg


$$ for u of course. please pm me.

adio
05-05-2006, 05:25 PM
ttt

James Bang
05-05-2006, 06:46 PM
hmmmm that's a nice box ;)
sorry I can't do designs, I would if I knew how.

GL

adio
05-07-2006, 11:03 AM
bump a-fukin-gain

PV Audio
05-07-2006, 01:59 PM
I'm on it right now *****.

PV Audio
05-07-2006, 02:06 PM
20 tall by 35 wide by 25.5 deep okay for you?

Beat_Dominator
05-07-2006, 02:10 PM
7cubes is practically IB :p:

PV Audio
05-07-2006, 02:32 PM
Not quite :yumyum:

adio
05-08-2006, 07:03 PM
bump a-fukin-gain

adio
05-10-2006, 09:26 AM
omg, what is the problem???!!!

tRiGgEr
05-10-2006, 11:13 AM
Is this for an 18?

adio
05-10-2006, 11:16 AM
Is this for an 18?
15

tRiGgEr
05-10-2006, 11:18 AM
Send me your prefered dimmensions and what style you would like. Down firing, foward firing. Also type of port and placement. Aero style or slot?

Bracing will be up to you. But I can leave the extra volume to compinsate for it.

adio
05-10-2006, 11:33 AM
Send me your prefered dimmensions and what style you would like. Down firing, foward firing. Also type of port and placement. Aero style or slot?

Bracing will be up to you. But I can leave the extra volume to compinsate for it.
see top post

tRiGgEr
05-10-2006, 11:40 AM
I didn't want to design a box and end up having you not want it due to the dimensions. But if you have absolutely no dimension limitations cool. I'll have one ready for you by this evening.

PV Audio
05-10-2006, 04:46 PM
Adio, I PMed it to you yesterday :confused:

tRiGgEr
05-10-2006, 06:05 PM
Adio, I PMed it to you yesterday :confused:

So am I no longer needed???

vetkilr
05-10-2006, 06:07 PM
So am I no longer needed???
Got any good 12L7 plans:p:

PV Audio
05-10-2006, 06:58 PM
So am I no longer needed???
Nope. It takes quite a bit more time to design a home theater enclosure than just a regular car audio one. There are reasons why they cost so much.

Crown_amps
05-10-2006, 07:00 PM
Nope. It takes quite a bit more time to design a home theater enclosure than just a regular car audio one. There are reasons why they cost so much.

why does it take longer?

PV Audio
05-10-2006, 07:59 PM
Because it's far more than 6 walls and a couple port pieces.

Chevyaudio
05-10-2006, 08:00 PM
Because it's far more than 6 walls and a couple port pieces.


Indeed...and the box you designed for me about 6 months ago is finally going to be built here in a few weeks.

tRiGgEr
05-10-2006, 08:13 PM
Nope. It takes quite a bit more time to design a home theater enclosure than just a regular car audio one. There are reasons why they cost so much.

Must have forgot who you're talking to...

PV Audio
05-10-2006, 08:16 PM
Adio is this kind of what you're looking for (since you obviously didn't get teh pm)

http://img84.imageshack.us/img84/7960/adio1pq.jpg (http://imageshack.us)

PV Audio
05-10-2006, 08:17 PM
BTW, the circle is 15 inches, not the actual mounting diameter.

PV Audio
05-10-2006, 08:18 PM
Indeed...and the box you designed for me about 6 months ago is finally going to be built here in a few weeks.
Do you still have it? Let me check it out for you again because that HD (as if I haven't said this enough) was corrupted until it failed and there was another guy ~2 months back who had funky dimensions (we're talking like 2 inches off).

SQBubble
05-10-2006, 08:31 PM
Adio is this kind of what you're looking for (since you obviously didn't get teh pm)

http://img84.imageshack.us/img84/7960/adio1pq.jpg (http://imageshack.us)


woww, thats a complicated boxx:crazy: , what does all those little circle do exactly?

PV Audio
05-10-2006, 08:42 PM
They create a centrifugal Kirorsky charge which inverts the polarity of the phase molecules off the back of the speaker. Basically, they let air flow through unrestricted while still being effective at bracing :D

j3bus2k3
05-10-2006, 08:53 PM
They create a centrifugal Kirorsky charge which inverts the polarity of the phase molecules off the back of the speaker. Basically, they let air flow through unrestricted while still being effective at bracing :D

LOL...I was gonna reply with airflow while bracing but I read your first line and thought :omg: Everything I thought I knew was almost **** on, lol.

PV Audio
05-10-2006, 09:06 PM
:laugh:

Chevyaudio
05-10-2006, 09:38 PM
Here ya go lemans...Sry adio for the Post dump.

http://i31.photobucket.com/albums/c393/chevyaudio/BoxPlans.jpg
http://i31.photobucket.com/albums/c393/chevyaudio/Boxplans2.jpg
http://i31.photobucket.com/albums/c393/chevyaudio/chevycut5ib.jpg

PV Audio
05-10-2006, 10:18 PM
Yep, it's all correct. You can omit the 4th port piece if you wish, it only lowers the tuning by like .8 of a hz.

SQBubble
05-10-2006, 10:38 PM
Here ya go lemans...Sry adio for the Post dump.

http://i31.photobucket.com/albums/c393/chevyaudio/BoxPlans.jpg
http://i31.photobucket.com/albums/c393/chevyaudio/Boxplans2.jpg
http://i31.photobucket.com/albums/c393/chevyaudio/chevycut5ib.jpg


sickk design, like the fact that the sub is firing the floor:yumyum: sounds like this would poundddd wut is this tuned too?

Beat_Dominator
05-10-2006, 10:39 PM
Yeah that'll work.

Chevyaudio
05-10-2006, 10:54 PM
I forget...But I think its in the 25hz range

PV Audio
05-10-2006, 10:59 PM
I can't even remember :(

Pyro_By_Nature
05-10-2006, 11:31 PM
So I guess I'm not needed as well?

Man, did this guy PM everyone on ca.com ?

PV Audio
05-10-2006, 11:35 PM
Lmao, basically.

lilmaniac2
05-10-2006, 11:36 PM
i got a pm , but with finals this week i been extremely busy

adio
05-11-2006, 03:34 PM
Adio, I PMed it to you yesterday :confused:
it didn't go through. the last one i got from you was on sunday. pm me again or [email protected]

adio
05-11-2006, 03:35 PM
So am I no longer needed???
who knows trigger. sometimes it feels like i'm no longer needed:crying:

adio
05-11-2006, 03:38 PM
So I guess I'm not needed as well?

Man, did this guy PM everyone on ca.com ?
yup:)

adio
05-11-2006, 03:39 PM
Here ya go lemans...Sry adio for the Post dump.


it's ok:)

adio
05-11-2006, 03:41 PM
Adio is this kind of what you're looking for (since you obviously didn't get teh pm)

http://img84.imageshack.us/img84/7960/adio1pq.jpg (http://imageshack.us)
holy ***!! all riiiiiiiiiiiiiiiiiiiiiight, now all i need is measurements of the pieces so i can get them to pat and we can get started

PV Audio
05-11-2006, 05:27 PM
Geah, let me send those.

adio
05-12-2006, 01:37 AM
Geah, let me send those.
a'ight now,;) leave me hangin for a week and a half

adio
05-26-2006, 07:13 PM
:D :peace:

PV Audio
05-26-2006, 07:59 PM
Whats that mean? :eyebrow: :D

adio
05-26-2006, 08:18 PM
Whats that mean? :eyebrow: :D
the box will be ready next week

PV Audio
05-26-2006, 08:44 PM
PM replied. Did you get him the info on the bracing yet?

adio
05-26-2006, 08:57 PM
****, i forgot to tell him to round the holes and ports off

PV Audio
05-26-2006, 09:02 PM
No no, I mean on the placement of the holes.

adio
05-26-2006, 09:11 PM
u mean this??:

PV Sound01 (10:03:19 PM): okay anyway
PV Sound01 (10:03:50 PM): onto the bracing
PV Sound01 (10:03:59 PM): now, you don't have to do it systematically how I did it
PV Sound01 (10:04:16 PM): but you MUST have a LOT of air flow through the braces
PV Sound01 (10:04:34 PM): you need them to be strong, but not solid so that the speaker doesn't think that it's in limited airspace
heyadio75 (10:04:52 PM): ok
PV Sound01 (10:05:16 PM): so the way I did it was make four inch holes every inch of wood apart or so
PV Sound01 (10:05:29 PM): and make smaller ones where there's larger pieces of solid board
heyadio75 (10:05:45 PM): ok
PV Sound01 (10:06:03 PM): you should do a roundover on each of the holes, and on the exit of the port
heyadio75 (10:06:15 PM): got it
heyadio75 (10:06:21 PM): ****
heyadio75 (10:06:38 PM): i wish i knew what to ask you incase ur forgetin anyting
PV Sound01 (10:07:40 PM): just the holes really
PV Sound01 (10:07:51 PM): as long as your builder is competent, he'll know
PV Sound01 (10:08:00 PM): roundovers, roundovers, roundovers
PV Sound01 (10:08:03 PM): that's the name of the game

PV Audio
05-26-2006, 11:04 PM
Bingo.

adio
05-28-2006, 02:46 AM
don't these port pieces look off to you?

they did, but adio took the image off

lilmaniac2
05-28-2006, 02:47 AM
port only has 1 dim on it...

adio
05-28-2006, 02:53 AM
maniac can you tell what this box is tuned to looking atthe pic above and the 1 on page 2?

lilmaniac2
05-28-2006, 02:55 AM
nope

adio
05-28-2006, 03:13 AM
i hate you chad

PV Audio
05-28-2006, 04:45 PM
Fixed via PM. Adio, remove the image.

adio
05-29-2006, 01:27 AM
Fixed via PM. Adio, remove the image.
done

PV Audio
05-29-2006, 01:29 AM
Gracias senor. :)

adio
05-29-2006, 01:42 AM
danada. just waitin on pat to contact me:):):):):):):):)

PV Audio
05-29-2006, 01:43 AM
Yeah man, sorry bout that. I'd refund you, but dis ***** broke!

PV Audio
05-29-2006, 01:43 AM
JP, hope it turns out alright :)

adio
05-29-2006, 01:47 AM
me too, i'm siked as hell about it.

PV Audio
05-29-2006, 02:28 PM
So what's this pat fool doin?

JP :)