chibahawk

04-24-2006, 11:25 PM

http://img62.imageshack.us/my.php?image=175cubes32hz26sqin2rg.png

Okay check out that design right there. It pretty much fits exactly what I want to do, however I'm guessing I need to minus the .084 displacement for my Pioneer sub from 1.75... so that box will actually be 1.66cuft. According to the calculator - I'm going to need to add an additional .924" to the 34.625" original Port length in order to tune the box to 32hz.

Is that correct? So it would be 1.66cuft with 35.55" of port length. Also I'm not to experienced with the slot port so I'm not sure if adding that .924" will mess anything else up, like the interior volume.

Help would be appreciated - thanks.

Okay check out that design right there. It pretty much fits exactly what I want to do, however I'm guessing I need to minus the .084 displacement for my Pioneer sub from 1.75... so that box will actually be 1.66cuft. According to the calculator - I'm going to need to add an additional .924" to the 34.625" original Port length in order to tune the box to 32hz.

Is that correct? So it would be 1.66cuft with 35.55" of port length. Also I'm not to experienced with the slot port so I'm not sure if adding that .924" will mess anything else up, like the interior volume.

Help would be appreciated - thanks.