View Full Version : polyfill question
04-23-2006, 03:46 PM
hello, i made my first sealed box ever (made a few ported ones before though)
anyways, the INTERNAL dimensions are 13.5 x 34.5 x 4, so its about 1.07 cubic ft
i was just wondering, how much polyfill should i put in it?
this is for an oz matrix elite 12 dual 4, powered by an arc kar 1000.2t @ 2 ohms (approx 900 rms)
i listen to mostly rap, a bit of reggae, and hardly anything else
04-23-2006, 03:56 PM
none? by adding about 1.5lbs per cf it will make the sub see a box which is about 25% bigger
04-23-2006, 04:12 PM
wait... its only 4 inches deep?
or am i missing something here....
04-23-2006, 04:57 PM
could be mounting the subs inverted seeings as his subs need a mounting depth of over 7"
04-23-2006, 05:02 PM
inverted, isn't 4 inches deep still really small? or do some people have enclosures that small
04-23-2006, 05:05 PM
aparently hdave does pics?
04-23-2006, 05:06 PM
ahh, im still waking up... =(
04-24-2006, 12:02 AM
ill post pics tomorrow.
yep inverse mounted
the sub is like 8" long itself
04-24-2006, 06:45 PM
1. how much polyfill should i use?
2. where do i get polyfill from?
okay here are a couple pics of the box (1.07 cu.ft sealed)
the sub will be inverse mounted (oz matrix elite 12)
and a pic of the amp powering it (arc kar 1000.2t)
04-24-2006, 08:49 PM
looking good man. you should be able to find polyfill at the closest wallmart. is in not the same stuff they use in cheap pillows? and as for how much it depends on how much larger you want your box to seem
04-25-2006, 10:16 AM
im not exactly sure.. i listen to mostly rap and some reggae, and usually not much more than that
what amount of polyphill do u guys suggest?
04-25-2006, 10:20 AM
I dont know a rule of thumb off the top of my head but 1 lb is what I've heard people suggest....dunno if that will work for your good though...
04-25-2006, 06:10 PM
1 pound per cubic foot is what Ultimate Electronics told me...but if ur inverting the subs i dont know if u need it or not
04-25-2006, 06:14 PM
There is no right or wrong answer here.
A properly sized enclosure shouldn't need any polyfill at all.
Other than that, play around with the amount of polyfill and see if you like/don't like the changes in sound. Keep in mind the changes will be small, so don't expect huge dramatic changes.
Buy a couple pounds of the pillow stuffing at Walmart. Start with no polyfill and listen. Try putting in 1lbs and listen again. Try adding .5lbs more and listen again. If you don't like it, take some or all of it back out.
04-25-2006, 06:30 PM
thanks a lot
what sealed volume would you guys reccomend for this sub?
04-25-2006, 06:34 PM
OZ recommends 1cuft...so your enclosure is pretty spot on already.