View Full Version : need box plans

04-22-2006, 11:55 AM
but im not exactally shure about specifics and was also asking for some help
i want 34hz and im figuring about some more than 2 cubes hifonics suggest 1 cube for each sub cant be wider than 34" or taller than 16" and its for 2x12s

i start with 2 cubes for each sub, and figure about .2 driver displacement for bolth
im also underpowering subs by about 100 watts and wated to up the cubeage a bit to compensate, so mabey another .1-.3? just my personal guess

please help and i also need someone to make up some plans for it once its all decided


04-22-2006, 12:17 PM
Hey buddy... Look 2-3 threads up in the sticky that says "box plans" :eyebrow:

04-22-2006, 12:19 PM

In case u had trouble ;)
2.35^3 33 hz

04-22-2006, 12:38 PM
i dont know if he will be able to fit 2 subs on that baffel.

04-22-2006, 01:08 PM
a little modifying will take car of that take a few inches off the depth widen it out and change the port length a lil bit.. No prob ;)

04-22-2006, 04:40 PM

04-22-2006, 10:34 PM
i realize that there is a sticky with box plans, im asking for 34hz and some advice, i want the box to fill my maximum dimensions for height and width, and yeah i think i would have a pretty big problem fitting 2 12 inch subs onto 23.75"