PDA

View Full Version : Help with 'vert trunk



Myster
04-12-2006, 03:51 PM
I got back in town and am going to finish up my wifes convertible but have to idea what to do with the layout/design of the trunk. I put the enclosure in (not finished yet) and have to figure out what to do with the two amps.

Anyone have any ideas on what I can do with the amp/enclosure layout of the trunk, I cant think of anything that would look good to the eye.

Trunk Specs:

1x US Amps I/S 4085
Size (LxWxH): 14.5 x 9.5 x 2.5

1x US Amps I/S 2200 (not pictured)
Size (LxWxH): 16.1 x 9.5 x 2.5

Custom sub enclosure for (2) Elemental Design 9.kV2 subs
Thanks
-sean

http://i63.photobucket.com/albums/h158/Myster480/DSCN0361.jpg

http://i63.photobucket.com/albums/h158/Myster480/DSCN0364.jpg

Quicker660r
04-12-2006, 04:06 PM
Lay them out in front of the box.
False floor would look nice and clean!

Myster
04-12-2006, 04:40 PM
update

Myster
04-12-2006, 09:07 PM
Update:
Made a template of the spare tire well and cut out the rod which secures the spare. Template is completely flush in the spare well, and will secure the amps and CDT crossovers. I will try and build it up high enough to be recessed from the top portion of the wheel well, and then build a new false floor and expose one of the amps.

My thinking is this would not take away much more trunk space (the enclosure is the only portion of the system that is currently taking up trunk space) and utilize the space of the wheel well.

Am i entirely crazy?? Here is a picture of my temporary template...
http://i63.photobucket.com/albums/h158/Myster480/DSCN0365.jpg

spitfirees20
04-12-2006, 09:12 PM
That box looks so clean, nice job. Looks like a good idea, but I have no real world experience with doing that so I have no comment.

NeverEnuffBass
04-12-2006, 09:16 PM
Wow nice cuts of that box man!

Bolognablake
04-12-2006, 11:29 PM
You could also build a floor of MDF, then cut out little 'windows' over the amps and cover the 'windows' with lexan.

Nice box too.

Myster
04-13-2006, 01:03 AM
whats the best way to cut the "windows" ? If I was to carpet the floor would I just flush mount from the top and use flat head screws? What is the best way to secure a false floor?

thanks and will keep updating!