PDA

View Full Version : Head unit choice



PESteele
04-11-2006, 07:01 PM
http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_291078777_tab=B,00.html?compName=PNA_ ProductDetailComponent
I can get this one from the classifieds for 165. It has more features But it only has 2.2 preout and 1kohm.

Should i instead get this one off ebay for like 130 http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4041_291078841,00.html
which has a few less features but 4v preout and 100ohm.

Does ohm really matter that much i like the first one more

PESteele
04-11-2006, 07:05 PM
i need to know fast

XtrmAudioCncpts
04-11-2006, 07:05 PM
lower the resistance and higher the voltage the better of you are but i wouldnt give up the features that you want just for the difference of the voltage on pre outs

PESteele
04-11-2006, 07:09 PM
will it effect it audibly

PESteele
04-11-2006, 07:52 PM
bump

loserpunk
04-11-2006, 08:14 PM
i'd choose features over preout voltage any day of the wk...

Cris
04-11-2006, 09:33 PM
HU choice #1. Higher preout voltage will do nothing for sq.

MikeyB
04-11-2006, 09:35 PM
HU choice #1. Higher preout voltage will do nothing for sq.

I think its actually more common for the sq guys to run hu's with higher pre-out voltage. Cleaner signal being sent to the amp.

loserpunk
04-11-2006, 09:38 PM
yes, more preout voltage is definately not a bad thing by any means, but will it give you the gains more features will.......no

pwnt by pat
04-11-2006, 09:39 PM
If you don't have noise with lower preouts, then having higher will do nothing. A good install, you don't have noise - period. All it REALLY gets you is a lower gain setting, which again, if you don't have noise, there's no benefit.

pwnt by pat
04-11-2006, 09:39 PM
If you don't have noise with lower preouts, then having higher will do nothing. A good install, you don't have noise - period. All it REALLY gets you is a lower gain setting, which again, if you don't have noise, there's no benefit.

spitfirees20
04-11-2006, 09:46 PM
Choice number 1