PDA

View Full Version : need help for a box for 2 type R's!



bang hard
04-10-2006, 01:07 AM
i have a box now, its Dual 12" Ported MDF Enclosure
2 Seperated chambers
Airspace: 1.12 cu. ft. per chamber/li>
Port Dimensions: 1" W x 11-3/4" H x 8-3/4" D
Cutout Diameter: 11-3/4"
Dimensions: 28-1/8" L x 14-1/4" W x 13-1/4" H

i think this is way to small for these subs.
but my trunk isnt that big, i have a 94 grand prix.
i could prolly add about 2 or 3 more inches to the dimensions of the box above and it will still fit in my trunk.

bjfish11
04-10-2006, 08:46 AM
yea, thats way too small. If you cant fit them both in properly (2.0-2.5 cubes PER sub) then you are probably better off just installing one with the proper airspace.

j3bus2k3
04-10-2006, 08:55 AM
Yea, man you need more volume per driver AND more port area. You should have about 25in^2 of port area per driver and 2-2.5ft^3 volume per driver.

bang hard
04-10-2006, 02:13 PM
could you find me a box or box plans? find the dimensions of the box?

bang hard
04-10-2006, 02:15 PM
will they sound a lot better in a bigger box then i have now b/c i dont know if i;m def or they just dont seem to hit hard enough for me.
there runnin off a kenwood class d amp @ 2 ohms 900 rms

bang hard
04-13-2006, 02:11 PM
would moe lesters box 4.5 @ 30 be good for type r's 12's?
that about all i got room for.

mikescanlon
04-13-2006, 02:11 PM
moe makes good stuff man


and that sounds about right.

revrider1
04-13-2006, 02:13 PM
moe makes good stuff man


and that sounds about right.x2