PDA

View Full Version : JL Audio's 12w6 box schematic . . .



SuperBlack350z
03-27-2006, 04:20 PM
Hey all. JL's site has a 1.25 volume box listed for a sealed enclosure. In the notes it says that bracing must be added for the overall volume, but in the same sentence it says this has already been taken into account. My question is, what type of bracing is typically used for a box for a w6, and what should the REAL dimensions be for the box, if different from the site?

PhatTonyDeMarco
03-27-2006, 04:22 PM
In a 1.25 sealed enclosure you would be perfectly fine without bracing...

Decipha
03-27-2006, 04:24 PM
1.25 is a little bitty guy

kotec123
03-27-2006, 04:26 PM
yea 1.25 is tiny....just use 3/4 mdf and fasten it together well and u shud be good

Pyro_By_Nature
03-27-2006, 04:31 PM
You won't need bracing for a 1.25cf. box.

j3bus2k3
03-27-2006, 04:44 PM
As its been said, your not going to need bracing for that small of a box. You'll be fine. Glad to see another tampa person on here...even though Im in orlando now.