PDA

View Full Version : Infinity tweeter wires



Bosaliniee
03-26-2006, 12:59 PM
ok, somehow i managed to break both wires off of the tweeter on both tweeters between switching them from one car to another. does anyone know which is positive and which is negative on the 50.5cs component system so i can solder it back on.

http://www.caraudio.com/forum/attachment.php?attachmentid=4880&stc=1&d=1143452507
kappa.JPG

Biker
03-27-2006, 03:49 PM
If you can take a very powerful magnifying glass, turn the tweeter over and connect a size "D" battery to it, If the cone moves out the the positive of the batter is the positive , If the cone moves in then, I guess you get it, But I dont know about seeing any movement so as you can see by the number of my posts I dont know jack ....... But learning fast......

3rdID
03-28-2006, 07:09 PM
ok, somehow i managed to break both wires off of the tweeter on both tweeters between switching them from one car to another. does anyone know which is positive and which is negative on the 50.5cs component system so i can solder it back on.

http://www.caraudio.com/forum/attachment.php?attachmentid=4880&stc=1&d=1143452507
kappa.JPG

dont have that model but on the 1011T's (taken from a component system), looking at the back, the insulation on the left side is clear w/black stripe and insualtion on the right side is clear

Slaugh
03-28-2006, 08:21 PM
usually one with a black stripe is the negative

RandyJ
03-28-2006, 08:57 PM
dont have that model but on the 1011T's (taken from a component system), looking at the back, the insulation on the left side is clear w/black stripe and insualtion on the right side is clear

On my 1001t's (from a set as well) the right is red, left is red/black.

Bosaliniee
03-29-2006, 12:53 AM
thank you very much for the help, i kinda figured the right side was positive but just wanted to make sure.