PDA

View Full Version : The Best, Loudest box. Plans Please



garrett58
03-24-2006, 12:34 PM
I need ideas on the best box you can possibly make. It needs to be for one 12".

Thanks

tRiGgEr
03-24-2006, 12:35 PM
Duh what speaker?

IamDeMan
03-24-2006, 01:09 PM
I threw a dart and it landed on 2.89 cu ft net tuned to 44 hz. That will definitely make the unknown sub play the bestest loudest.

thai_creeper
03-24-2006, 03:50 PM
haha do some research man (search button) or at least let them know ur specs (sub brand/model, dimensions your trunk can fit)

Lakota
03-24-2006, 03:59 PM
It takes more than plans to make a loud box. The fabrication of the box can have a lot to do with it.

skadude016
03-24-2006, 04:01 PM
I need ideas on the best box you can possibly make. It needs to be for one 12".

Thanks
ok whatcha wanna do is tune the box to 22hz with 100sq. inches of port and the box should be about 3 cubes :)

Pyro_By_Nature
03-24-2006, 04:03 PM
Everyone knows for the bestest loudest box EVURRRR you go with 10 cubes with a 10" x 10" x 10" port DURRRRRR!!!

jalverson
03-24-2006, 04:04 PM
or better yet go with 5 cubes @ 60Hz make your port about 10" wide, stick your head in and blow it up :)

skadude016
03-24-2006, 04:06 PM
Everyone knows for the bestest loudest box EVURRRR you go with 10 cubes with a 10" x 10" x 10" port DURRRRRR!!!
congrats on 1000

skadude016
03-24-2006, 04:08 PM
or better yet go with 5 cubes @ 60Hz make your port about 10" wide, stick your head in and blow it up :)
I jus realized what your avatar was about. I laugh pretty hard

RandyJ
03-24-2006, 04:09 PM
The main thing you should take away from this experience, is if you do not know how to get something, then ask, OR, READ AND RESEARCH????? We love to help, but there is so much mroe to designing an enclosure then putting wood together and saying, vuala, it's the best and loudest. And if loudest is what you want, then your best bet would be bestbuy because you obviously care not for quality.

noob with an RS
03-24-2006, 04:10 PM
don't listen to them they're just assholes.. heres some plans for ya man:

duct tape a shoebox (size 12) shut (lid and box) so that it is airtight. you can stiffen the box beforehand by taping toothbrushes in rows so that the box does not flex (you can use popsicle sticcs if u dont have extra toothbrushes). after duct taping the box airtight cut a hole using scissors and a lisa frank stencil. drill a hole in the bac of the box for the wire to go through by using your hands to create a drilling motion with a sharp pencil. be careful not to drill a hole in your hand.. it can be very painful and lead to lead poisoning. now place your woofer inverted yes inverted (this is an inverted box design) which means the cone should be facing the inside of the box and the magnet should protrude outside. attach the woofer to the box using staples and use krazy glue to seal the gasket to the box. voila! you are done. nowpaypal $5 to [email protected]

jalverson
03-24-2006, 04:14 PM
I jus realized what your avatar was about. I laugh pretty hard

yeah ya like that, whats really funny is that my fiance belongs to peta and any other animal rights orginaztion you can htink of LOL

NJack2AF
03-24-2006, 04:15 PM
Ya I used to shoebox design myself... It WANGS!!!

jalverson
03-24-2006, 04:18 PM
don't listen to them they're just assholes.. heres some plans for ya man:

duct tape a shoebox (size 12) shut (lid and box) so that it is airtight. you can stiffen the box beforehand by taping toothbrushes in rows so that the box does not flex (you can use popsicle sticcs if u dont have extra toothbrushes). after duct taping the box airtight cut a hole using scissors and a lisa frank stencil. drill a hole in the bac of the box for the wire to go through by using your hands to create a drilling motion with a sharp pencil. be careful not to drill a hole in your hand.. it can be very painful and lead to lead poisoning. now place your woofer inverted yes inverted (this is an inverted box design) which means the cone should be facing the inside of the box and the magnet should protrude outside. attach the woofer to the box using staples and use krazy glue to seal the gasket to the box. voila! you are done. nowpaypal $5 to [email protected]

+1 FER JOO!

nissanrider06
03-25-2006, 04:13 AM
haha u guys scared him off

wanginloud1
03-25-2006, 04:14 AM
I need ideas on the best box you can possibly make. It needs to be for one 12".

Thanks



TCAB all they way i would have to say:crazy:

garrett58
03-25-2006, 12:55 PM
The cubic should be around 1.65-1.75 cubic feet.