PDA

View Full Version : Deebo's Box Build by: Psych0



psych0ticnemes1
03-19-2006, 02:50 PM
This is mainly for people to see my work and somewhat increase business, but here is a few pics of my progress...

It is for two 12" RLP's tuned to 28htz

http://img100.imageshack.us/img100/4602/dcp00049fl.jpg (http://imageshack.us)

http://img56.imageshack.us/img56/3875/dcp00063ue.jpg (http://imageshack.us)

http://img100.imageshack.us/img100/4395/dcp00070zy.jpg (http://imageshack.us)

http://img100.imageshack.us/img100/2125/dcp00108rq.jpg (http://imageshack.us)

deebo
03-19-2006, 02:58 PM
Thanks for the pics!

Moe Lester
03-19-2006, 03:06 PM
that almost looks like particle board

psych0ticnemes1
03-19-2006, 03:16 PM
that almost looks like particle board

nope, 3/4 " MDF

Mark_ab
03-19-2006, 09:25 PM
That's all your port area for two 12's?

PV Audio
03-19-2006, 09:33 PM
I thought the exact same thing, those rlps will move a lot of air.

psych0ticnemes1
03-19-2006, 10:19 PM
he wanted 40, i gave him 43.5...

deebo
03-19-2006, 10:32 PM
this is off of soundsplinters website per driver:

1.5 cu ft net
Tuned to 28 Hz
20 sq. in. of Vent Area

T/S Parameters
Dual 4 ohm

Qts: 0.219
Qes: 0.242
Qms: 2.266
Fs: 18.856 Hz
Re: 6.26
Ls: 7.382 mH
Lp: 9.456 mH
Rp: 14.68
Dia: 250 m
(% shift) 33.2 %
Vas: 142.7 L
Mms: 168.8 g
Cms: 421.9 u
Bl: 22.74 T*m
n0: 380.1 m
SPL: 87.79 dB
Sd: 0.0471 m^2
Xmag: 26.0 mm
Xmax: 24.2 mm

http://www.soundsplinter.com/rlp12_premium_series_12_inch_DIY_subwoofer_informa tion.html

psych0ticnemes1
03-20-2006, 09:19 AM
exactly :) Thanks anyways though, for acting like i'm a newbie box designer...

tRiGgEr
03-20-2006, 11:15 AM
CLEAR silicone FTW.

psych0ticnemes1
03-20-2006, 01:06 PM
CLEAR silicone FTW.

lol, normally do, local hardware store ran out of clear so i used white... i believe he plans on covering it, if not... what's a lil white caulk ;)

IamDeMan
03-20-2006, 01:35 PM
lil white caulk ;) Sorry to hear that HAHAHAHAHAHAHA

deebo
03-20-2006, 02:01 PM
the white caulk is not a big deal.. I just need something so I can listen to these subs already!! =)

I will eventually cover it anyways so no biggie

PhatTonyDeMarco
03-20-2006, 02:05 PM
Good to see you are getting some business man. My box should be here today according to the UPS website.. :D I'll deffinitly let you know how it goes.

soundstreamer
03-20-2006, 02:05 PM
Sorry to hear that HAHAHAHAHAHAHA
lolololol that's what i thought when i saw his post.

psych0ticnemes1
03-20-2006, 06:00 PM
lolololol that's what i thought when i saw his post.

Hence the ;) pervs, lol

JL12W7INAGS300
03-20-2006, 10:18 PM
that almost looks like particle board



isn't MDF technically particle board?

psych0ticnemes1
03-20-2006, 11:24 PM
http://img372.imageshack.us/img372/8369/dcp00052lw.jpg (http://imageshack.us)

psych0ticnemes1
03-20-2006, 11:27 PM
http://img239.imageshack.us/img239/7208/dcp00067np.jpg (http://imageshack.us)

psych0ticnemes1
03-20-2006, 11:28 PM
http://img76.imageshack.us/img76/7574/dcp00090oh.jpg (http://imageshack.us)

PV Audio
03-20-2006, 11:34 PM
Keep that caulk off the outside, it shouldn't need it.

deebo
03-20-2006, 11:37 PM
I can just sand it down a bit .. no big deal plus it is getting carpet anyhow

PV Audio
03-20-2006, 11:41 PM
Yeah, but you can't sand caulk.

deebo
03-20-2006, 11:50 PM
then ill exacto knife it. Its really not a big deal

carguy83
03-21-2006, 01:34 AM
looks nice, those RL-p will sound nice.

i've yet to hear my RL-p 15 ported :(

psych0ticnemes1
03-21-2006, 09:12 AM
Yeah, but you can't sand caulk.

(1) caulk does sand... Secondly, no, you don't NEED it on the outside, however I want to be absolutely sure that there aren't any leaks....

Thirdly, go trash someone elses thread... I've seen some of your work as well... don't see me ripping you???

Compliments are welcome, advice as well... but if you don't like my CAULK job, stay out of my thread... please?

PV Audio
03-21-2006, 08:17 PM
Apparently people are pretty tense in here and are quick to flame. I don't know how you can justify getting angry when all that I simply say is that it doesn't need caulk on the outside. It's sealed like a Mercedes on the inside. To each their own I guess.

deebo
04-02-2006, 12:48 PM
update*

well the box didnt fit in the trunk so I had to cut it down 2 inches. I know sound will suffer a bit but I had to do it if I wanted to even hear my subs. Anyways here it is for now. Thanks a million to psych0 for everything. I highly recommend him for your box needs.

http://www.imagestation.com/picture/sraid203/p7e22b75cd5152526aea773ce7043fd67/ef9a7cec.jpg

truckstoy
04-03-2006, 10:04 AM
nice box kris, keep up the good work !!!!!


mike

baseballer1100
04-03-2006, 10:13 AM
Thats a nice looking box.

CJL
04-03-2006, 04:34 PM
the box looks good painted