PDA

View Full Version : Need plans for four L7s



Raisedin305
03-19-2006, 10:07 AM
Just ordered another two so it's going to be four 15" L7s in total.:naughty: I need two box plans made. One for SPL another for daily driving. I want each sub to have their own chamber.

Daily driving box- must have their own chambers, tunning around 30hz-33hz, was going to go with aeroports but if you prefer square thats fine.

SPL box- Aeroports (no crazy sizes), it can be a wall, this box would be just for SPL and in the local shows here they don't care how big your box is.


Hit me up on aim- Raisedin305 or post here if you can make me some plans. You must have some refs with good feedback. Only people I know that are known for plans are Mikescanlon, Saywhat, Moe Lester, and I think DBFAN (may be confused with some one else).

Raisedin305
03-19-2006, 10:19 AM
BTW I want it also to be CRX style.

Space to work with-
48"H
46"D
16"H

Raisedin305
03-19-2006, 12:14 PM
Ttt

Raisedin305
03-21-2006, 09:42 PM
Anybody??

mobeious
03-21-2006, 09:57 PM
i would help ya man but u don't have enough space for 4 L7 15's u need bout 4 cubes per sub so 16 cube plus port u have 15 cubes total

Raisedin305
03-21-2006, 10:01 PM
i would help ya man but u don't have enough space for 4 L7 15's u need bout 4 cubes per sub so 16 cube plus port u have 15 cubes totalThought I had 20cubic ft??????????/

mobeious
03-21-2006, 10:26 PM
i might be able to do something if i do the exact dimmentions u gave me... that leaves no room for give though dimmensions u gave me equal 17.3cubes

Raisedin305
03-21-2006, 10:28 PM
i might be able to do something if i do the exact dimmentions u gave me... that leaves no room for give though dimmensions u gave me equal 17.3cubes
Are you sure?

This what I did...
48" x 46" x 16"= 35,328 divided by 1728 = 20.44444444444

I don't know if that is correct though.

PhatTonyDeMarco
03-21-2006, 10:30 PM
Are you sure?

This what I did...
48" x 46" x 16"= 35,328 divided by 1728 = 20.44444444444

I don't know if that is correct though.

Subtract 1.5" from each dimension to factor in wood displacement.

Jester1318
03-21-2006, 10:30 PM
You may not have any room for any kind of bracing, which that box seems like it would need

mobeious
03-21-2006, 10:30 PM
u are doin outside dimmensions u have to calculate inside dimmensions

46.5x44.5x14.5 = 30004.125 = 17.36

PhatTonyDeMarco
03-21-2006, 10:31 PM
And how do you plan on having each driver in its own chamber, and still share a common port?

Raisedin305
03-21-2006, 10:33 PM
And how do you plan on having each driver in its own chamber, and still share a common port?Don't know if it's possible but I was looking at Steave Meades setup. He has four 18" MTs CRX style.

Raisedin305
03-21-2006, 10:34 PM
u are doin outside dimmensions u have to calculate inside dimmensions

46.5x44.5x14.5 = 30004.125 = 17.36True, your right.

PhatTonyDeMarco
03-21-2006, 10:38 PM
And you say the SPL box can be a wall... But you would take it out after comps? In case you didnt know, a wall is built IN TO the vehicle, meaning it wont just slide out for a daily vehicle...

Do some research before you talk out of your ***...

Raisedin305
03-21-2006, 10:41 PM
And you say the SPL box can be a wall... But you would take it out after comps? In case you didnt know, a wall is built IN TO the vehicle, meaning it wont just slide out for a daily vehicle...

Do some research before you talk out of your ***...OK well in that case "wall" meaning from the floor to the top leaving about a inch or less at the top so I have enough space to get it in or out. Either way I know I would have enough cubic ft if I was too extend it higher.

PhatTonyDeMarco
03-21-2006, 10:43 PM
OK well in that case "wall" meaning from the floor to the top leaving about a inch or less at the top so I have enough space to get it in or out. Either way I know I would have enough cubic ft if I was too extend it higher.

Are you looking for a free plan? What exactly is your point for this thread...?

If I were you, and had daddy's money, I would do ~16 cubes with a 6" Aero for each driver tuned to 34Hz for your daily.

Raisedin305
03-21-2006, 10:43 PM
i would help ya man but u don't have enough space for 4 L7 15's u need bout 4 cubes per sub so 16 cube plus port u have 15 cubes totalTry 48"x46"x18"..that came up to 23cubic ft (whole box) to me.

Raisedin305
03-21-2006, 10:47 PM
Are you looking for a free plan? What exactly is your point for this thread...?

If I were you, and had daddy's money, I would do ~16 cubes with a 6" Aero for each driver tuned to 34Hz for your daily.Free plan? No. I have contacted several people such as Moe Lester who is willing to do them but isn't sure when (told me maybe by the end of the month, maybe:crap: ) and I talked to Shawn and he may be able to do them but he is busy for Daytona right now. I am willing to pay. Please be a little more mature and don't bring that daddy **** into this thread. Point of this thread is to see who here can build me some plans. I had some by Mike Scanlon but he wanted me to use two 10" aeroports for the daily driving box and 5 10" aeroports for SPL, that was when I only thought of doind two L7s too! Everybody told me that is too way port area so I want other plans.

So basically I have waisted $45 in plans so far and nothing yet. Mike charged me $20 for two plans and I paid $25 for two 10" aeroports that I dont think im going use:crap:

mobeious
03-21-2006, 10:47 PM
http://www.caraudio.com/gallery/1/4/2/9/8/415.JPG

here u go

mobeious
03-21-2006, 10:48 PM
ill take the 10" aero's off ur hands asap

Raisedin305
03-21-2006, 10:49 PM
ill take the 10" aero's off ur hands asapNot sure yet.

mobeious
03-21-2006, 10:50 PM
hey man AIM me ... Mobeious

Raisedin305
03-21-2006, 10:52 PM
ill take the 10" aero's off ur hands asapCorrection. Isn't aeroport. It's just a 10" PVC pipe.

mobeious
03-21-2006, 10:54 PM
ill still take it... can u AIM me

Raisedin305
03-21-2006, 10:55 PM
ill still take it... can u AIM meTried to. Says your not on.

mobeious
03-21-2006, 10:55 PM
whats ur aim

Raisedin305
03-21-2006, 10:56 PM
whats ur aimRaisedin305

NeverEnuffBass
03-21-2006, 10:59 PM
To be honest with you if you don't want to use up massive amounts of room it sounds like 2 L7s with good power on them would be a better choice than 4 of them crammed into a smaller box.

Raisedin305
03-21-2006, 11:01 PM
To be honest with you if you don't want to use up massive amounts of room it sounds like 2 L7s with good power on them would be a better choice than 4 of them crammed into a smaller box.I don't mind using more space as far as height goes. Im willing to do 48"W x 48"D x 20"H

JL12W7INAGS300
03-22-2006, 01:00 AM
why dont you just do 3 L7's. It would probably sound loude with three than four in the correct boxes. I could be wrong....

Raisedin305
03-22-2006, 06:23 AM
I paid for four.

Raisedin305
03-22-2006, 07:57 AM
Talked to saywhat?...he can't do them right now:crap:

NeverEnuffBass
03-22-2006, 03:31 PM
I paid for four.

Thats why it pays to make sure you can properly fit equipment in your car before buying it.

Raisedin305
03-22-2006, 03:40 PM
Thats why it pays to make sure you can properly fit equipment in your car before buying it.I could fit it in my car. These are dimensions if I keep it under the window

48"x46"x16"

I don't care about keeping it under the window.

I'll do 48"x 46" x 20", as long as I can still use my rear view mirror.