PDA

View Full Version : Help with 1st box



haunther
03-17-2006, 02:27 AM
I have 2 15" memphis M1's
on the memphis site it says the box vented
should be 5.25 cubes @ 34hz 14.5X2.5X16

Can some one hook up a diagram.
I might be keen to make a paypal donation.

Trixter
03-17-2006, 01:06 PM
box

top/bottom: 33"l x 14.5"h
sides: 14.5"h x 17.5"d
back: 33"l x 14.5"h
front: 14.5"h x 15.5"l (x2)

port

14.5"h x 15.25"l

http://img472.imageshack.us/img472/8859/s2az.th.jpg (http://img472.imageshack.us/my.php?image=s2az.jpg)

Chevyaudio
03-17-2006, 01:08 PM
you hit me at the wrong time...I would of done you a full 3D if I had the time.

haunther
03-21-2006, 01:41 AM
those are spec's for 12's can you make it 15's?

Trixter
03-21-2006, 08:12 PM
those are spec's for 12's can you make it 15's?

i used the specs you gave me...what are they for 15's then?

haunther
03-21-2006, 10:52 PM
its weird.... bc the front is supposed to be 14.5"h x 15.5"l, but the sub is 15x15 lol its not goin to fit i cut it an tryed :(

James Bang
03-23-2006, 01:44 AM
its weird.... bc the front is supposed to be 14.5"h x 15.5"l, but the sub is 15x15 lol its not goin to fit i cut it an tryed :(
being that this is your 1st box....
the front FACE is 14.5 NOT including the top and bottom pieces which are 3/4" + 3/4" =1.5". so top to bottom is a total of 16", which will fit 15" subs. Most 15" subs require a cutout of 14" which would leave you w/ 1/4" above & below the cutouts.

haunther
03-23-2006, 01:52 AM
so i will be drilling into the top an bottem of the box to secure the sub?

James Bang
03-23-2006, 02:31 AM
that's if you mount the sub traditionally, but if you turn the sub just a bit, then you'll be able to keep all the screws on the face piece. if you would to drill on the top or bottom piece, then you would most likely split the wood.
here's a pic of an example... notice that the sub is tilted a bit... the top hole is not in the middle on top.
http://i8.photobucket.com/albums/a11/mobster909/11-14-05_1521.jpg

haunther
03-23-2006, 02:36 AM
humm i guess i try to cut another ring, my moron friend broke the old one today