PDA

View Full Version : what should i go?



RumbleNTheTrunk
03-11-2006, 04:08 PM
Ok well i got my console box finished mdf/fiberglassed....its around 2 cubes sealed....I was told im looking output the sub im going with is the elevation audio x12" so the question is...what should i do to port it? drill out a hole and drop in a aeroport or what?

.::DuD3::.
03-11-2006, 04:10 PM
yeah, cut a hole out and drop a precision port in there.

PowerNaudio
03-12-2006, 10:09 PM
Ok well i got my console box finished mdf/fiberglassed....its around 2 cubes sealed....I was told im looking output the sub im going with is the elevation audio x12" so the question is...what should i do to port it? drill out a hole and drop in a aeroport or what?

yes, you can cut a hole out and put a port on it, just make sure you calculate the tuning frequency for the proper port length and diameter of the port or ports, and keep in mind port noise, which usually means you went with a too small of a port, too big of a port will cause your sub to bottom out at some frequencies even with normal power level since the sub will feel like is in an infinite baffle or free air.

laters