PDA

View Full Version : Minimum width for a box with 3 12's



lionel2
03-11-2006, 11:46 AM
whats the smallest width i can fot 3 12's into..JL 12w6s...12 1/4 inches wide each...could i get away with 37" box width???..cutout diameter 11 inches...thats 33 inches with 4 inches to spare..inch on the ends and in the middle..for braces of 3/4 inch mdf...subs will take up 36 3/4 inches on outside.

Chriscivic
03-11-2006, 02:00 PM
mine is 39" with three type r's, real close fit, you could probably take maybe an inch off

Black_Jesus
03-11-2006, 02:21 PM
if you can position them like this ull have more room, but u need to be able to go taller

, ' ,

lionel2
03-11-2006, 03:20 PM
i measured it form JL's specs...12 1/4 per sub wide x 3= 36 3/4...with 3/4" mdf..this will be perfect closest fit...look at this too..

3/4"+11"+1 1/4"+11"+1 1/4"+11"+3/4=37"

Hope you guys agree..i triple check too..even made a sketch..thanks.