PDA

View Full Version : Lingering Resin Smell



freddie
03-07-2006, 08:40 PM
On Sunday night I glassed in a form to go into a rear storage compartment in my truck. I put down just one layer of matte over masking tape. On Monday morning I pulled the form out of the truck.

Ever since I've left my truck with the door windows, rear window and the sun roof open. Yet the **** resin smell is still strong as ever in the truck. It is as if the seats have absorbed it. There isn't any actual resin in the truck, hasn't been since I pulled the form on Monday morning.

How long is is going to take for this to dissipate and is there anything I can do to help it along? Having children in a fiberglass fumed up vehicle is not a good idea.

Can't drive with the windows down due to the weather.

Ingleside
03-07-2006, 08:43 PM
it took a week untill most of the fumes were out of my car after i made my glass box.

bjfish11
03-07-2006, 09:16 PM
box fans our your friend. I always put one in and aim it out the trunk so that not much of the odor will get too far into the car.

Nexson
03-07-2006, 09:27 PM
i had this problem, the perfect solution was, I went to wal-mart, picked up that smelly leaf, and then bought these air vents, that are like little clip on pieces that go into your a/c vents and blow out a fresh smell when you turn ur a/c on, plus the smelly leaf pretty much takes over your car, espically if its hott where u live, this worked within half a day!

noob with an RS
03-07-2006, 09:29 PM
nexson what kind of honda is that in your sig it looks clean.. is that a 2005-body civic with a kit?

PhatTonyDeMarco
03-07-2006, 09:29 PM
I had the same problem, and I didnt even glass inside my car.. I put a couple layers of resin inside of my MDF enclosure, and just having the enclosure in my trunk got the stank in the car for a few days. Wait it out, or get airfreshener.

Nexson
03-07-2006, 09:32 PM
nexson what kind of honda is that in your sig it looks clean.. is that a 2005-body civic with a kit?
an accord with a kit

Alexwaves
03-07-2006, 09:45 PM
i cant remember the name of the stuff we use but it is like a wax that we melt with a heat gun into the poly resin and mix in B4 we mix the Methyl-Ethyl-Ketone Peroxide (M.E.K.P Catalyst) or in normal english "harder" and it would not stink up the shop or the car.. i will find the name out when i go in 2 morro.

Mark_ab
03-07-2006, 09:57 PM
if you **** in your glove box you'll forget all about the resin

JL12W7INAGS300
03-07-2006, 10:50 PM
if you **** in your glove box you'll forget all about the resin



I think thats a direct quote from Confucouis himself

ramos
03-08-2006, 08:14 AM
1. Welcome to the forum my brother
2. Should have put another layer or three on before you removed it to fight against warpage.
3. Air fresheners be it automotive or in a can are your friend. :)

theCybe
03-08-2006, 08:17 AM
Is the resin still sticky? Maybe you didn't use enough hardener :)

SurgicaL
03-08-2006, 09:42 AM
Use epoxy resin. Its more expensive but its stronger and you can barely smell it.
Polyester resin ftl.

freddie
03-08-2006, 11:50 AM
The enclosure is only .4 cubes and yes it is quite hard. As I said, the enclosure hasn't been in the car since Monday morning so whether I used enough harderner or not isn't relevant at any rate. The shape has four sides and a bottom so I don't really see how it is going to warp. It has a recessed lip on the top that a mdf baffle will be placed in as well. Warpage isn't an issue, just that **** smell that gives me a headache within 30 seconds. Air fresheners may mask the smell but the underlying fumes, which are not healthy, will still be present. Hopefully they will dissipate soon enough.

Epoxy resin, yes, I forgot about it but doesn't matter much now since I can't undo the smell that is already there.

theCybe
03-08-2006, 11:52 AM
I have a puddle of resin with no hardener in it on my garage floor, it's been there for months and still smells. That's why I asked. Sounds relevant.

btnhfan
03-08-2006, 12:28 PM
Resin smell is great.

Just keep on sniffin it.