PDA

View Full Version : Check my box



GTmafia.com
03-01-2006, 04:37 PM
I have a design I would like someone to double check for me. It is 2 cubic ft after sub and port displacement, with a 4" PVC pipe 11"long for a port. This is for a pair of tens. My math gives me a tuning of 30 hz. Please correct me if I'm wrong. This is going in the back of a wagon, so will I have alot of port noise? Any questions? Also where is the best place to vent the port for SQ?

First post very educational forum, thanks.

j3bus2k3
03-01-2006, 04:41 PM
That might not be enough port area for 2 10's...try going with 2 4" diameter ports or even a 6" Aeroport.

GTmafia.com
03-02-2006, 11:43 AM
I am probably wrong but doesn't a larger diameter port make tuning higher?

KnOkIn It 420
03-02-2006, 12:31 PM
Not enough port,try usin 2 ports,and ur math is wrong ,4" x11" would tune u around 35 hz

GTmafia.com
03-02-2006, 12:50 PM
So then, 2 4" ports at what length? Also where should they be placed?

KnOkIn It 420
03-02-2006, 12:57 PM
any where u can fit them,but there one proplem,cuz the box is so small.the 2 ports need to be about 35 inched long....what kinda subs do u have and how much room do have to play with,u might just be better sealing them

GTmafia.com
03-02-2006, 09:23 PM
From what I am getting, I think I am going to stay sealed and just build a new box. Thanks for your help.