PDA

View Full Version : fiberglass mold help!



TrlcKed_OuT
02-26-2006, 04:58 PM
im molding the bottom of my extra cab f150 and i have put 2 layers or matt on and its still no where near where i need it..should i use a layer of fleece to really thicken it up ..mainly the edges are not getting very strong....

azbass
02-26-2006, 04:59 PM
use more fiberglass about the edges. and scraps of wood on the bottom part, glass over them

TrlcKed_OuT
02-26-2006, 05:02 PM
so just use some wood and scratch the fleece!?

azbass
02-26-2006, 05:05 PM
yeah use soem wood. save the fleece

bjfish11
02-26-2006, 05:07 PM
dont use the fleece, the mat will probably soak more resin and be stronger anyways.

TrlcKed_OuT
02-26-2006, 05:23 PM
ok well ill do wood im just tryin to save some money cus i would need lik 15 layers of matt for the mold to be nice and strong...its only for 4 sealed ed 9''s so ill use some wood and see how it goes from there..

jsntarrant
02-26-2006, 07:00 PM
no fleece...mar glass will strenghthen it up too

nVRuckus
02-26-2006, 07:07 PM
What I would do if your going thick is 3 layers of mat, 1 layer of trunk liner, 3 layers of mat ;) strong enough to stand on ;)

TrlcKed_OuT
02-26-2006, 10:04 PM
what and where can i get "trunk liner"..