View Full Version : Bondo is drying on door pods, what next?
02-25-2006, 03:11 PM
Ok, so I'm doing my first work with fiberglass and I have the mold and fiberglass and everything and I just bondo'd the door pods and now letting them dry. What are the next steps once they are dry?
02-25-2006, 03:29 PM
I would of sanded the bndo while it's still wet... that way you dont' have to sand as much.
02-25-2006, 03:32 PM
^ x2, while somewhat wet. i would hit it with a "cheese grater" or really rough sand paper. to smooth everything out. once dry. work your way up the the grits of sandpaper.
02-25-2006, 03:34 PM
02-25-2006, 04:47 PM
I just sanded with 40 grit and then just added another coat of bondo to fill the holes. Do I go over with 40 again and then work my way up? If there is more holes/highs/lows do I bondo the whole thing again or should I just bondo where the high/lows are?
02-25-2006, 05:34 PM
sand it more, with a couple more variations in the grits to get highs/lows a little more even. then if there are still pin holes, thin out the bondo, whether with less hardener or add a little resin to it. if you have kitty hair, you can use that on the pinholes as well.
02-26-2006, 08:48 AM
you have kitty hair, you can use that on the pinholes as well.
glazing putty or filler primer is meant for pin holes, not kitty hair