PDA

View Full Version : baffle



Dozy_production
02-16-2006, 10:05 PM
Well, was making a box and i might of screwed up on calculations. When i cut out the hole for the woofers in my baffle, the hole is about and inch away from the edge of the board. Is this too thin? i think actually that some of the screws that are going to support the sub are over the top and bottom piece boards that are sandwhiching my baffle. sorry, cant explain things if my life depended on it.

bimma85
02-16-2006, 10:07 PM
me=kinda :confused: are you saying for example....can a 13" baffle hold a 12" sub?

As long as the wood doesnt crack, I dont see why not.

Dozy_production
02-16-2006, 10:07 PM
or at least the support screws would be going into those top and bottom pieces. not over them.

Dozy_production
02-16-2006, 10:09 PM
aight, just needed that re-asurance... kinda like when you were younger you needed that night light to protect you from the thing crawling under your bed.

bimma85
02-16-2006, 10:09 PM
so there is only an inch of wood on each side of the cutout? that'll be pushing it :crap:

netherland24
02-16-2006, 10:11 PM
picture of what u mean?

Dozy_production
02-16-2006, 10:36 PM
i cant get pics but lets say the subs has about 12 hole for the screws. about 3 or 4 of those holes would land on the top and bottom boards. is it completely neccessary to put screws in all the subs screw holes. if so then ill probably make a wall to get through this problem