View Full Version : Is it alright??
02-16-2006, 11:04 PM
Alright heres a picture of my setup ( 2 Bandpass boxes) and i'll tell you what i did,http://www.caraudio.com/vb/attachment.php?attachmentid=4689&stc=1&d=1140145273 First i bolted the 2 boxes together from the back chamber, n covered up the holes that where there before (in yellow) so i could mount the amp and left the other holes (green). Then i cut the 2 orange holes in the back center. (they were just a little smaller than the originals). So i was wondering if i screwed anything up.
02-16-2006, 11:19 PM
I mean did i mess up anything with the settings because i heard that they are tuned specifically
02-16-2006, 11:23 PM
Most likely, yes. You can't just go punching holes in a box wherever you please.
02-16-2006, 11:49 PM
02-17-2006, 01:35 AM
what kind of amp is that?
might i add. drill four 2" holes on each panel, it will sound good, as compared to your tiny *** orange holes
02-17-2006, 01:59 AM
might have been a good idea to ask this questions BEFORE you messed it up.