PDA

View Full Version : Truck box



ynot818
02-15-2006, 02:06 PM
How difficult will it be to build a box like this:

http://www.cardomain.com/ride/2103802 fourth pic

Any difference between putting the subs firing down as opposed to firing up?
I could also fit a single 10" (5.5" max depth) but would rather run the two Kickers. Anyone hear two of these 8" before?

ramos
02-15-2006, 02:30 PM
That's a pretty **** enclosure right dere. Doesn't look to difficult. Lots of measuring and pattern making with some cardboard and a compass. There might be some measurable output difference between down firing and up firing. But I have seen almost identical enclosures one down one up, and couldn't really hear a difference. Enclosure for down firing has too sit up off the floor a couple inches for clearance. :)

TrakDay
02-15-2006, 03:18 PM
Look into the RE RE subs. I am putting 4 RE8" subs behind my rear seats in my crew cab silverado. the mount depth is only 4" on the 8s and probbaly not much more on the 10s and 12s!

ynot818
02-15-2006, 03:58 PM
Look into the RE RE subs. I am putting 4 RE8" subs behind my rear seats in my crew cab silverado. the mount depth is only 4" on the 8s and probbaly not much more on the 10s and 12s!

I would love to fit more than two 8", but I have a Frontier and space is limited. Only space is under the seat. Might compare the Kicker 8" and RE though. Thanks