PDA

View Full Version : 2 - 1968 camaro, 1 - 1969 camaro, 600+ hp mouse, T56



MSSOKC
02-14-2006, 08:00 PM
Not exactly car audio equipment, but I thought someone might be interersted.

1. 1968 camaro - $5500 - This girl is cherry, has perfect floor pans, body is straight except one small area in the bottom of the passenger quarter. All she needs is a motor/trans/paint/seats and you'll have a hell of a car. Front has been rebuilt with all poly bushings, has polished upper A arms and polished hood hinges. She really has to be seen to be appreciated.

http://www.yourimages.us/uploadedimages2/DSC03429.JPG
http://www.yourimages.us/uploadedimages2/DSC03437.JPG
http://www.yourimages.us/uploadedimages2/DSC03439.JPG

2. 1968 Camaro - $3500 - Pretty good condition, has original glass, some bondo and needs a full floor pan. It's still a pretty good rolling chassis.

http://www.yourimages.us/uploadedimages2/DSC03606.JPG
http://www.yourimages.us/uploadedimages2/DSC03610.JPG
http://www.yourimages.us/uploadedimages2/DSC03604.JPG

3. 1969 Camaro - $1250 - X11 car, but is pretty rough. Needs front clip, floor pans, etc. Has new quarters.

http://www.yourimages.us/uploadedimages2/DSC03602.JPG
http://www.yourimages.us/uploadedimages2/DSC03608.JPG

4. 355 - $3250 - 600+ hp on a demon 850 and long tubes. Has over $7k in parts alone and only about 200mi. This motor revs like a bike, everyone that heard it, freaked out, it will get tons of attention. I will not negotiate on this, I'm already taking too much of a loss. Here's what she has:

GM Forged lower end
Speed Pro forged pistons 11.5:1
Billet solid roller cam .630 lift
CC Solid roller lifters
CC Comp magnum pushrods
Crane Gold Race RR's
7/16" studs
All comp triple valve springs and hardware
Dart heads fully ported by Donnie Anderson of Performance Engineering
4 bolt main block o-ringed
SFI approved balancer and flywheel
Victor Junior Intake
7 qt. Canton Pan w/ matching pickup
Double Billet roller timing chain

T56 6 spd. - $1000 - Has viper shift fork. Fresh out of rebuild.

InhumanAcura
02-14-2006, 08:08 PM
interested in any car audio equipment for the t56?

MSSOKC
02-14-2006, 08:11 PM
Sorry, got more than I need. I'm just looking for cash so I can close on my house.

Savstyle
02-14-2006, 08:20 PM
Not exactly car audio equipment, but I thought someone might be interersted.

1. 1968 camaro - $5500 - This girl is cherry, has perfect floor pans, body is straight except one small area in the bottom of the passenger quarter. All she needs is a motor/trans/paint/seats and you'll have a hell of a car. Front has been rebuilt with all poly bushings, has polished upper A arms and polished hood hinges. She really has to be seen to be appreciated.

http://www.yourimages.us/uploadedimages2/DSC03429.JPG
http://www.yourimages.us/uploadedimages2/DSC03437.JPG
http://www.yourimages.us/uploadedimages2/DSC03439.JPG

2. 1968 Camaro - $3500 - Pretty good condition, has original glass, some bondo and needs a full floor pan. It's still a pretty good rolling chassis.

http://www.yourimages.us/uploadedimages2/DSC03606.JPG
http://www.yourimages.us/uploadedimages2/DSC03610.JPG
http://www.yourimages.us/uploadedimages2/DSC03604.JPG

3. 1969 Camaro - $1250 - X11 car, but is pretty rough. Needs front clip, floor pans, etc. Has new quarters.

http://www.yourimages.us/uploadedimages2/DSC03602.JPG
http://www.yourimages.us/uploadedimages2/DSC03608.JPG

4. 355 - $3250 - 600+ hp on a demon 850 and long tubes. Has over $7k in parts alone and only about 200mi. This motor revs like a bike, everyone that heard it, freaked out, it will get tons of attention. I will not negotiate on this, I'm already taking too much of a loss. Here's what she has:
GM Forged lower end
Speed Pro forged pistons 11.5:1
Billet solid roller cam .630 lift
CC Solid roller lifters
CC Comp magnum pushrods
Crane Gold Race RR's
7/16" studs
All comp triple valve springs and hardware
Dart heads fully ported by Donnie Anderson of Performance Engineering
4 bolt main block o-ringed
SFI approved balancer and flywheel
Victor Junior Intake
7 qt. Canton Pan w/ matching pickup
Double Billet roller timing chain

T56 6 spd. - $1000 - Has viper shift fork. Fresh out of rebuild.
got any pic of this one?

MSSOKC
02-14-2006, 09:12 PM
I'll be out of town until Sunday, but yeah I can get pics of the motor. It doesn't look like much special, after I ended buying all the parts for it, I ran out of dough for all the cool chrome stuff.

PESteele
02-14-2006, 10:15 PM
which ones run got pics of the last 2

MSSOKC
02-14-2006, 10:55 PM
All of them are rollers. I do have the bad *** small block, but it's not included with any of the cars.

SATX210
02-15-2006, 08:03 PM
bump for you steve. i cant wait for my dad to hand over his 69 tome. its all original and still runs.

MSSOKC
02-16-2006, 02:25 PM
Thanks...the 69's are my favorite. An all original 69 will be worth a pretty penny, one hell of gift when you get it. Hold on to it, these cars values have increased almost 75% in the last 5 years. It looks like the red car is sold.

Lil Poot
02-16-2006, 03:07 PM
does the motor not come with the carb, or headers? full mod list and pics?

mike75356
02-16-2006, 03:14 PM
VERRRY interested in motor but would like to see some pics when you get back.

SATX210
02-16-2006, 09:01 PM
yup i know. my cousin was part of the engineering team that redesigned the new "concept" so he has a few ideas for mine since he left GM and is part of the toyota design team down here now. i love the '69 as well but if the right offer comes for it.

Ayrton
02-17-2006, 09:43 PM
The Norwood code of "X11" means either a base car with Style Trim or an SS350 with Style Trim. Do you know which one you have?

MSSOKC
02-20-2006, 02:33 PM
Without having the original motor, there's no way to tell. It was a V8 350 car, so more than likely it's an SS.

MSSOKC
02-20-2006, 02:34 PM
The motor does not come with headers, carb or accessories, I'll put together a build list and try to post it tonight.

MSSOKC
02-21-2006, 07:02 PM
TTT...Buy me, closing time is getting close.

MSSOKC
02-24-2006, 02:35 PM
Red 68 and the 69 are sold.

MSSOKC
03-04-2006, 09:10 AM
TTT... needs to go.

MSSOKC
03-04-2006, 03:58 PM
Motor and tranny need to go asap! $3000 for the 355 and the $750 for the tranny.

maldecido33
03-04-2006, 04:04 PM
omg, if this was in may/june, i'd be all over the motor and tranny in a ****ing heartbeat

god **** timing

free bump for ya :-/

seth350
03-04-2006, 04:05 PM
If you were closer, I have a friend who would take that motor in a heartbeat. He needs a motor for his chevelle

MSSOKC
03-04-2006, 04:07 PM
If you were closer, I have a friend who would take that motor in a heartbeat. He needs a motor for his chevelle


****, was just up in Nashville a couple weeks ago. It can be palletized and shipped.

MSSOKC
03-06-2006, 03:14 AM
T56 is SOLD


I just took a quick glance at shipping the motor. For example, from San Antonio, Tx, to Nashville, Tn was about $300, Much less than I expected. I'll work with anyone who needs shipping.

MSSOKC
03-24-2006, 12:21 PM
TTT...Black 68 and motor still for sale.