View Full Version : What to do...
springy101
01-20-2006, 11:33 PM
build a wall for em
Savstyle
01-20-2006, 11:40 PM
send them to me:D
trevor87
01-21-2006, 12:06 AM
Sell em.
stones
01-21-2006, 12:10 AM
Heres some cheap tweeters
http://www.fcsurplus.ca/shopping/shopdisplayproducts.asp?id=31&cat=Tweeters
Yes?
:DP:
And that, my friends, is a post that I have absolutely no recollection of ever posting.
:crazy:
soundstreamer
01-21-2006, 10:23 AM
And that, my friends, is a post that I have absolutely no recollection of ever posting.
:crazy:
had you been drinking?
squeak9798
01-21-2006, 10:23 AM
And that, my friends, is a post that I have absolutely no recollection of ever posting.
:crazy:
Rum & Coke will do that to ya......
squeak9798
01-21-2006, 10:24 AM
Anyways....PE's site is down.
What speakers are they?
IamDeMan
01-21-2006, 02:17 PM
MTM using this?
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=264-555
1.25 cu ft enclosure tuned around 40 or so.
IamDeMan
01-21-2006, 02:20 PM
Or maybe this tweeter
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=277-062
IamDeMan
01-21-2006, 02:23 PM
That's better.
:)
AWWW C,mon. Just go service a few men in the alley and get the vifas :naughty:
IamDeMan
01-21-2006, 02:25 PM
Theoretically the morel would be a better choice, but Power handling may be less than desirable. With the morel you would theoretically have matched out put between woofers and tweeters (88db W and 89db T) so attenauation may not be needed taking some complexity out.
No?
IamDeMan
01-21-2006, 02:37 PM
True, the only problem is I don't like flush mounting squares :emb:
Fine then go with TB :P
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=264-822
IamDeMan
01-21-2006, 02:39 PM
WAIT! hold the phone Do 3-way WWMT with this crazy buyout. Hell just for shits N giggles right?
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=279-274