PDA

View Full Version : Cleaning out my basement.



JimJ
01-09-2006, 03:44 PM
Lots of audio and non-audio related stuff for sale. Most of it isn't worth too much individually, make me offers if you're interested in any of it.

Guts to a 1GHz Celeron machine...mobo, 40gig HD, CD/floppy drives, power supply. All of it works, just haven't had time to configure it.

Creative Audigy 2NX external sound card, will do 7.1 surround. Optical inputs...missing the USB cable, but you could always buy another for cheap.

Texas Instruments TI-86 graphing calc.

Teac W-350 dual tape deck & Optimus single tape deck.

Box of 100 blank tapes.

3 foot dia. painted steel satellite dish. Good for TVRO, heavy-duty DSS use, or Wifi. Comes with feedpoint and mast bracket.

25 feet of low loss microwave-rated coaxial cable. N-connectors soldered on both ends.

Audio Technica ATR55 electret condenser microphone w/ stand.

Two 19" CRT monitors. Black in color, excellent condition. Shipping will be a lot.

Spare Canon printer...uses either parallel cables or USB.

cyantist
01-10-2006, 03:11 PM
Creative Audigy 2NX external sound card, will do 7.1 surround. Optical inputs...missing the USB cable, but you could always buy another for cheap.

Any pics of this? Any idea how much you want for it?

Raven
01-10-2006, 10:49 PM
Specs on the computer? What mobo is it?

JimJ
01-10-2006, 10:52 PM
Any pics of this? Any idea how much you want for it?

$40 plus shipping is what I'd want for it, comes with all setup software and such. The USB adapter cable is probably a few bucks at a computer supply-type place. I'll take a few pics in a minute or two and post them.

To answer Raven's question, I'm not sure exactly as I'm not much of a computer hardware person...but it's the mobo from an IBM Netvista lower-end desktop from a few years back. I can take some pics of it if it makes things clearer...

JimJ
01-10-2006, 10:53 PM
I also found two BASIC Stamp II microcontrollers and integrated breadboards, if anyone wants those. Still in bubble wrap.

JimJ
01-10-2006, 11:19 PM
The Audigy 2NX...

http://img371.imageshack.us/img371/2347/img90889np.jpg

TI-86 graphic calc...

http://img371.imageshack.us/img371/8890/img90932cz.jpg

Not sure if this is a good enough pic of the mobo, but maybe it helps.

http://img371.imageshack.us/img371/5817/img90980ri.jpg

I also have a 2.5 cubic foot sealed enclosure for a 15"...done in a black crackled laquer finish.

http://img371.imageshack.us/img371/9127/img90906si.jpg

In addition, I've got a dual 12" ported enclosure, 1.5 cubes per sub, single L-shaped port tuned to 27Hz. Built for two e12a.22's, but will work for many other drivers. Covered in light gray carpet. I'll take pics of that if anyone's interested.

theCybe
01-10-2006, 11:53 PM
What do you need for the stamps?

JimJ
01-11-2006, 03:10 AM
I've got two of these: http://www.parallax.com/detail.asp?product_id=28158

I don't know...$30 shipped for each? They're new, doesn't come with any documentation, but Parallax has a lot of supporting info on their site...

bimma85
01-11-2006, 03:55 AM
Price on the 15" box to 50311? Also what are the dimensions...how it look? Scratched up anywhere?

bimma85
01-11-2006, 10:39 PM
Price on the 15" box to 50311? Also what are the dimensions...how it look? Scratched up anywhere?
^^^

JimJ
01-11-2006, 10:45 PM
I'll get a quote on it tomorrow, I need to get another quote on an amp I'm sending out as well.

As far as the condition goes, there are a few places where the finish is scratched on the top, and on the underside. But a simple light-grit sanding and re-coat will cover anything up, there's no chips or dents in the MDF itself.

bimma85
01-11-2006, 10:46 PM
cool, whats the dimensions on it... dont want you to get a quote and what not and then the box be too deep for me.

JimJ
01-11-2006, 10:52 PM
A little over 18" tall, 18" wide, and 19" deep...with a double baffle and internal bracing taking up some of the volume.

bimma85
01-11-2006, 10:54 PM
:(, 1.5" too deep. NM :crap:

JimJ
01-12-2006, 02:01 PM
Sorry to hear that.

Back up to the top.